Model Forum / Radio Controlled / Air Models / April 2004

Hi, I just purchased an Aero-works Edge 540 .46 size arf and was wondering if
anyone has experience with it? They had one hanging in the local hobbyshop and
it sure looked nice. Bought one in the box but don't plan on building it right
away. Any tips? TIA, Dan.

I have a Futaba 4VF radio that came with an RTF model I bought and totalled
last year.  I'm looking at putting together an ARF for this summer.
Obviously, I will need a receiver and servos.  Do I need to make sure they
are Futaba as well?

wanted to say thanks to all that answered my post on gasoline engines
,, i can see where mounting all servos and receiver to the tail end
will keep radio equipment more than 12 inches away from the
engine,,but what about the wiring for the wing servos,,got any ideas

Need a piston+liner+ring for an old Webra Speed 91 2 stroke with
Dynamix carb. Where can I find these parts in the UK? Haytree is
pretty expensive and so I wondered if any of you guys knew another
source. Thanks in advance.

Hi gang..
 while fooling around FLA for a week  I stumbled  xross this shop  in
orlando Whew!! what a shop!!  this is the shop that all shops should
be measured by!!  yes i know that they have the weather to fly year

Anyone have a data sheet for an NE5045? CD8081 would be the same.
Thanks
Joel

I've flown primarly gas powered planes and would like to add an electric to
my collection.  Can you guys recommend a good and easy to build ARF?
Thanks

I just finished building the 1/6 scale cub from Sig.
I am thinking of ordering the 1/5 scale cub as well, but I have one
question.Is the 1/5 scale a better kit than the 1/6 ie is the elevator made
of laminated 1/8 balsa, are there any interlocking parts?

Morning gents...
can anyone point me in the right direction for a balance point on a
flying wing.  Planform is similar to a Zagi...
cheers

I love this plane the looks are simply elegant, any ideas where i can
get more info and drawings?
Thanks

I am not flying pattern, just for fun.
Building an airframe with split elevators, one servo for each.
Are the accuracy of servos and their positioning so far off as
to require a synchronizer?

I am interested in buying from www.wildharerc.com  For that kind of
investment: $399 (although no hardware included), I don't want to buy a
mistake. I am interested in the Extra 300LX. I have a BME 50cc that needs a
home.

Many of my son's dealers for the RCWindjammer are model airplane people.
Many of his customers enjoy both airplanes and remote control surface
sailing and this is why I am taking the liberty of inviting you to see a
short, 2.5 minute .wmf video of some really fast and maneuverable ...

Anyone have the low and high RPM limits for this engine. It's does ok
from mid to full throttle but the idle is rough and dies.I've adjusted
the low end and just can't find that rite spot.The low end is not like
my other engines.The little offset screw that rocks the plate back and

Are there any aerodynamic advantages of thin cord full length ailerons over
thicker cord tip ailerons? If one were to replace full length ailerons with
tip ailerons should one keep the area the same?
Seabee