Model Forum / Radio Controlled / Air Models / May 2004

One more try -  - Anybody out there know of a link to "Miller" the
Company that makes 1/2 A electric starters?

I have a low time OS 46 FX (about 1/2 gallon through it) I have had
since new. After the using for the last time last year, it was run dry
of fuel, after run oil put in and stored in a dry location.
The engine HAD BEEN running last year with the main needle open 2 1/2 -

First, this is a great park flyer.  I've only just started getting involved
in RC aircraft, and my only previous plane is the J-3 (also by GWS which
makes me sound like a salesman! Lol.)
Construction was simple, of course, I'd write the directions somewhat

Hope someone can help a complete novice (rc plane idiot)  I broke the 3
blade prop on my alpha 60 trainer and could not get an exact replacement, so
the tech at Horizon reccommended a 12x6 prop.  Went to the local hobby store
and bought two APC 12x6 props.  Dang!  wouldn't fit on ...

Hi all..
Looking at purchasing a Field battery charger such as the Super Nova
but what would people recommend?
Regards

I have been flying the ABC for a while now and have had this problem 3
times now
2 on brand new wings with no... let me say that again NO damage to
them at all.

Hi All;
I was out at the schoolyard some time ago flying the Rare Bear with an IPS
DX-A setup and two Lipo cells.  It was pretty blustery and overcast, and I
was trying to get some altitude - I kept it full throttle all the way up,

Just getting back into R/C after a long, long time.  (I built a
"Gentle Lady" glider about 20 years ago).
Well, I have two basic questions regarding a glider that I am
currently assembling.

If you live in or near the Modesto, California area I have some free R/C stuff
I am giving away but you must pick it up in person.  I have a Kraft Electric
Chipmunk that was crashed but can be repaired or used for parts, a Radio Elecon
Nite Scout r/c car, some Sullivan control rod, ...

Does anyone know where to find the websites that tell you how to Zip tie the
motor in and the tail boom?  Are there any other suggested mods?  thanks -

A group of us installed new safety fences at the three pilot stations
for our club field. Of course, a few members had to gripe that we used
the "wrong" material. The irony is that we replaced the old fence with
the same type of material as the old fence, plastic snow fence (or

A fellow club member wnats to set up seperate Elevator servo's on a plane
and his JR 3810 ADT
I used to have a 3810 but can't remember how this is done.
Is it AUX 1 for the second servo?

   Has someone out there got a Supertiger .61 that they can check the
setting of the low end needle on?  I just picked up a new carb for mine
(long ago crash... long boring story) and I noticed the high end was out
something like 6 turns!  That makes me suspicious that the low end ...

Hi all..
Just bought a Blackhorse Travel Air as my second aircraft.  Any
pitfalls to watch when putting it together?
Build my Thunder Tiger okay and learned a few do and don't so I'm

this
feature may be helpful.  See url below.
To those guys who "know" about these techniques, your ideas are welcom