Model Forum / Radio Controlled / Air Models / June 2004

there is a boat on ebay and has a 35mhz challenger set in it
I have warned him to remove the radio and sell it separate  perhaps a few
others could do the same
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=5905764873

Bought aerobird challenger, seems too hard to control. May be it's too windy
that day. I'm Los Angeles area, can somebody help me? Should I join AMA?

Preferably ready to fly, so what have you guys got lurking in your garages
etc! Have got one but it is extremely tired and used and would like another

email me: Tom@mapctSPAMMM.com removing the SPAMMM

Which is the best website to advertise kits for sale in the UK?
Kjell Aa
Oslo, Norway

I have a Slow stick with two HS 55 servos and one of them is giving me some
issues.  It will constantly lock up and make a vibration noise (jittery
action from the servo), sometimes the only way to get it to stop is to
unplug the battery pack.  I have tried this servo on all ...

If you live in Belgium or neighbour country.
COME and SEE US ! !
Our field is located 30km south of Brussels (town Nivelles), close to
E19 Paris-Brussels highway

plaese some url's  from complete or good RC shops (i prefer cars and
plains )

I am in the market for a ARTF electric glider using 7.2v to 9.6v standard
buggy sized packs as I all ready have these from my buggy ,concorde ,and
twinjet , something alone the lines of a Ripmax Nebula with budget around
the £100 for the airframe I have 4 small servos hitec hs 81 a ...

OK there are lots of very good models out there which require, or are
designed for electric motors.
What I want to know is there an easy calculation which can convert IC, to
electric?

Would it be a good Idea for bargain of the day or similar to be posted ie
where you can get a 400 powered Mirage 2000 for £16.50  or Hitec hs-55
servos for £10.99(and you can if you know were to look)  or does everybody
like to keep there bargains to them selves

Hello All you guys that know bunches of stuff about bunches of stuff.
I got a small question concerning carbon fiber rods.
Is it possible to bend carbon fiber rods to a permanent angle of about 30
degrees???  And if so what method would be used, heat, solvent, microwave,

A little help, guys, please.
Zenoah G-23: won't turn up over half throttle (4,500RPM).  Idles reasonably
well, transitions nicely (until that 4,500RPM peak).
Regular gas w/ Amsoil at 85:1 (1.5 oz./gal.).  20-6 prop. Medium fuel tubing,

It just amazes me that in the scale model groups, full scale flight groups and
many other related groups there is a buzz about the next great step in Space
history.
So why is it that I see nothing in this group?

I have an OS 10 and some retracts for a 40.
My email is: (Remove X's)
Inquires@XSXiXtXeXwXaXrXeX.com
I'm in the Ottawa area.

Some time back, someone was building an experimental aircraft that was a 1:1
of an Ugly Stick.  Did it ever fly?