Model Forum / Radio Controlled / Air Models / June 2004

this is a test

Is this a AMA requirement or recommendation that you stand behind a
fence or barricade?????
Thanx

Is it possible to change , say for example the frequency of FUTABA
7CAP from 72MHZ to 40MHZ
If you can mail, me that would be great bharat@pondugula.com
Regards

Can anyone tell me what is the active chemical in "kicker" type products that
speed superglue bonding?  Thanks in advance.

can any one point me to a site to download a jr tx manual
thanks

Hi all, does anyone have any experience of this model? I've just bought one
off Ebay, fitted with 24 cc petrol engine, it has over 1lb of lead in cowl
to get C of G right. I can't see any way of lightening tail end to reduce
the amount of nose weight, can't imagine how much lead it ...

Confirmed.  Judi Dunlap appointed as interim District V VP.
Her qualifications are:
Appointed as Contest Coordinator for the State of Florida (2001) and made an
AMA member and elevated to Leader Member at the same time by District VP Jim

I'm building my second kit airplane, a Sig Piper Cub J-3, and need a little
clarification on the wing/aileron construction.
The instruction booklet has me building the trailing edge sheeting over the
plans.  The confusion factor comes up with the various illustrations... Most

Any ideas guys....must be strong ...or ill have to go back to a normal type
n make some adjustments...
Pleeeeeease tell me  that some ones got one ....ok ill wait!

I've now built a couple scale WWI planes (Albatros, Nieuport 11, Sopwith 1
1/2 Strutter) and they seem to fly pretty well. (though I'm a little
reluctant to try rolls, as I'm thinking the roll rate is too slow...)
I'd like to do more than just poke holes in the sky, so I'm wondering ...

Just suppose the AMA By-Laws are to be followed.
Article IX
Section 3. To be eligible to discharge the duties of AMA President, a
nominee must be a Leader member of the AMA and must previously have served

I have an chance to purchase a Kyosho P-51 D Mustang ARF, still in the
box, for under $100.  Does anyone have any details about how well this
ket flies and am I getting a good deal.
slk

Why is it at the age of 39 I still feel the same excitement when I pass a
model shop as if I was 8

Hey all,
I am also new to R/C, I have purchased the PT40 Avistar select, Futaba
controller and some other goodies. I also have the GP Realflight G2
software/controller. My question is this, I would like to import an Avistar

As any of you chaps that have dealt with these sods they are a pain to set
up as in cut here and add there..the weathers different so adjust again. Now
the question is does anyone make a kit
or pipe with inflight adjustable adaptor? or have i got to do this myself