Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / Radio Controlled / Air Models / June 2004



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
wing question03 Jun 2004 14:46 GMT11
If an ARF has a three piece wing and the dihedral is not the same on both
sides (1 inch difference at the wing tip), what are the consequences to the
flight characteristics ?
Regards,
Ripmax EMail address, I WANT TO COMPLAIN!03 Jun 2004 07:36 GMT17
Does anyone know of a complaints email address or telephone number for
Ripmax?
Grain direction of balsa and ply??03 Jun 2004 03:26 GMT6
Vaction is coming up for me, so I decided to build a fokker d8 from
plans only ( 40" span, brushless geared motor ). I noticed grain
direction plays an important role. Any suggestions inwich direction
the grain should run in critical areas of the plane would be helpfull.
Newbie Questions02 Jun 2004 23:29 GMT13
I am ALMOST finished my first trainer (an Eagle 2) and have a couple of
questions to ask before doing so.
BTW --- thanks to all who suggested a Z bend + plastic connector for the
throttle. As you pointed out quite patiently, it DOES work well. A little
Shipping to overseas APO address?02 Jun 2004 22:56 GMT6
Has anyone ever had anything shipped from Tower Hobbies to an overseas APO?
Did it go okay? How long did it take? Damage? I have a cousin in the Azores
islands, where an American base is located, and someone has offered to let
him use his APO. He wants a RTF trainer and I'm ...
French SE502 Jun 2004 22:54 GMT4
Would any of you going to La Ferta Alais in a few weeks be calling in at
the National air museum at la Bourget.    It is well worth it.
 I have a US e-mail friend who would like lots of photos of the freshly
restored SE5a.
KlassKote epoxy paint?02 Jun 2004 13:01 GMT2
Has anyone used this paint? It sounds like current-technology SuperPoxy -
would love some first hand feedback!
TIA -
Rick
4CH RC Helicopter US$139 - New Store02 Jun 2004 00:38 GMT1
Radio Controlled Helicopter - 4CH RC Heli for US$ 139 from
HobbyJapan2000.com
Sorry, I am new to news group. So if I selected the wrong category.
Please let me know. I do not mean to SPAM. Just want to make a notice
4CH RC Helicopter US$139 - New Store01 Jun 2004 21:59 GMT2
Radio Controlled Helicopter - 4CH RC Heli for US$ 139 from
HobbyJapan2000.com
Sorry, I am new to news group. So if I selected the wrong category.
Please let me know. I do not mean to SPAM. Just want to make a notice
FA: WWII Target Drone Motor (O-15-3 McCulloch)01 Jun 2004 20:36 GMT2
Here:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2480711435
??? to blaurobot@yahoo.com
FA: aristocraft radio, OS twin 28 paperweight, TWO airtronics radios ... charity!01 Jun 2004 18:55 GMT3
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5901601072&sspagename=STRK%3A
MESE%3AIT&rd=1

Airtronics radios (2) 6-ch FM w/ trainer cord, case
Vanguard VG6DR transmitters radio ideal trainer setup!    starting a
$5.99
Monocote wrinkle?01 Jun 2004 17:42 GMT1
  I heat monocote till it is very tight but over time, sometimes less than one
summer the monocote wrinkles but will tighten back up just applying a little
more heat again. I just tightened up a bad wrinkle useing heat, hot and long
enough I was amazed the monocote did not melt. I ...
tips on using fanfold or bluecore?01 Jun 2004 08:22 GMT1
Anyone have knowledge of websites that have tips , techniques on using
fanfold, bluecore foam? Thanks in advance Pat
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 May, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.