Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / Radio Controlled / Air Models / June 2004



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Bellsouth problems21 Jun 2004 20:44 GMT1
Anyone having problems posting to this newsgroup (others OK)?. Found this at
http://home.bellsouth.net/newsgroups  at system status:
"Notice
Currently, we are experiencing intermittent posting problems as well as "400
Bunch 'o r/c stuff on eBay21 Jun 2004 20:02 GMT6
All of the following are NO RESERVE auctions, shipping can be combined
on multiple items.
Dremel belt disc sander, w/ plenty of grit:
<http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=4308116286&sspagename=STRK%3A
MESE%3AIT&rd=1
>
test 221 Jun 2004 19:00 GMT1
test 2
Best Foamie Flying Wing ??21 Jun 2004 18:45 GMT8
Any suggestions?
I am after something with a decent speed range, ie something that will fly
in light air and will penetrate OK when the wind is a bit stronger. This
would be more for aerobatics etc rather than combat. I have seen a good
Direct drive, props sizes?21 Jun 2004 12:42 GMT13
I have a HIMAXX  4100 brushless motor that was used in a gear box with
a 10x8 GWS prop with success. But I prefer direct drive and it came
with a collet adapter for APC props.
My questions are can I use it without gears for direct drive with an
How to get your airplane out of a tree21 Jun 2004 11:18 GMT26
Well, I officially flew my first R/C airplane on my first ever flight
today and got it stuck in a tree.  But.. I got it down after 3 or 4
hours using various tactics.
My Aerobird Challenger was lodged about 40 or 50 feet up in a tree and
La Ferte Alais 200421 Jun 2004 10:45 GMT1
Can anyone out there tell me when the 2004 La Ferte Alais Giant Scale Show
will be taking place.  It is normally the last weekend in June which would
make it the 26th and 27th June 2004.  I know it's early but a friend who is
going with me has a disabled son and has to make early ...
Jet engine builders.  Still active Turbonique, Tesla21 Jun 2004 03:14 GMT2
I've been working on these things for years.
Is anyone still making them besides me?
Al Doyle
DOYLEJET
test only - don't bother reading21 Jun 2004 03:14 GMT3
This is just to see if it makes it to RCM.... having troubles
with posts never getting to their destinations....
Thanks
Ken.
Park flyer 'low range' transmitters?21 Jun 2004 01:08 GMT2
Do any companies make low power 4ch FM tramsitters specifically for
slo park flyers?  Say in the 1000 - 2000 foot range?
aeroworks 540 for sale, southern california20 Jun 2004 21:34 GMT1
i have a 36% Aeroworks 540 that is near completed (not covered).  workmanship
is first rate, and includes fuel tank, tail wheel and two glass cowls.  there
is no better flying airplane that an Edge...very predictable, no bad habits.
needs a 80 to 100cc engine, and will come in at ...
Control range of Aerobird Challenger?20 Jun 2004 20:20 GMT7
Got another newbie question.  I've got an Aerobird Challenger and they
claim that
it has a control range of 2500 feet.  I find it hard to believe as
I've found
eBay Auction Items20 Jun 2004 19:50 GMT10
Got some R/C things up on eBay, take a look:
5904822553, 5904823367, 5904824296, 5904824970, 5904825591, 5904826064.  Feel
free to ask questions.
Dr.1 Driver
Connecting the Triton charger to a desktop power supply20 Jun 2004 02:07 GMT10
I have the Triton charger, which has battery post clips for connection
to battery terminals. However, I would like to also power the charger
from a desk top power supply, which has banana jack connectors:
  <http://www.valcoelectronics.com/psupplies/ps21.htm>
chester electic meet?19 Jun 2004 19:22 GMT5
Anyone know what this meet is like? Was gonna go to Telford show - but then
saw this posting. whadda you all reckon???
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 May, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.