| Thread | Last Post | Replies |
|
| Remote Control | 26 Sep 2004 14:55 GMT | 21 |
I have a Tower Hobbies Tower Trainer 40 MKII 4-Channel RTF 62". I just put it together and then was testing how it responds to the remote control. When I push up on the right control stick the rudder moves and when I push sideways on the left control stick the elevator moves.
|
| How do I repair a single fiber hinge? | 26 Sep 2004 10:24 GMT | 7 |
After inspecting my Avistar, I found the hinge at the very tip of the aileron has parted. How do i successfully replace are repair this? do I need to pull the aileron completely off and replace all four? How do I remove the old material?
|
| Looking for JU-52 3M.... | 26 Sep 2004 04:48 GMT | 3 |
Hello again fine group, I have been searching for a JU-52 3M kit in the 6'-8' wing span size range and found,,, shall I say not much, not much at all. The Graupner electric is no longer made and too small anyway.
|
| Eagle II Wing Washout ? | 26 Sep 2004 03:30 GMT | 6 |
Twenty years ago I started a Carl Goldberg Eagle II and then stopped. I completed the woodwork on the wing and covered it with Coverite's, Super Coverite (fabric type). I did not have a flat, warp-free surface to work on and now I have a wing that is not exactly true.
|
| Old controller now illegal? | 26 Sep 2004 01:39 GMT | 21 |
This past week I was literally given everything I need to start flying RC aircraft, including two aircraft and engines. A relative's neighbor was throwing everything out, but my relative rescued the stuff and surprised me with them.
|
| flair scorpion | 25 Sep 2004 23:16 GMT | 1 |
Does anyone know the price on this plane on the Flair web site and availability? Is it a large swallow?
|
| super nova goes wild | 25 Sep 2004 22:35 GMT | 5 |
Well my one did as i bought an 1850mah MH pack and left it to charge on auto thinking it knows what it sees. Hmmm checks it about 90 mins later and the readout says 2100mah....YIKES ..and the battery is quite warm indeed. So stopped it and pondered over why it went so high.
|
| Stu Ricmond on Mode I | 25 Sep 2004 21:44 GMT | 62 |
Be sure to get a copy of R/C Report, September 04 and read Stu Richmond's Just Plane Fun column. Is he serious or not? You be the judge. Per Mr. Richmond, "I don't know of even one advantage to flying R/C using a Mode II transmitter. That's right, not even one. And in this month ...
|
| Questions from a novice | 25 Sep 2004 19:51 GMT | 7 |
Hello all. After building scale models for more years than I care to remember, I finally decided that it was time to take the plunge and get into RC flying where my planes do more than just sit and look pretty. I am at the reading and information gathering stage, with this being ...
|
| Nicad RX pack | 25 Sep 2004 19:29 GMT | 3 |
What is an average voltage reading without load for a fully charged 4 cell Nicad RX pack?
|
| Futaba 6EXA TX to PC lead | 25 Sep 2004 19:03 GMT | 4 |
Where can I get one in the UK (prefer online) & how much are they? Thanks!
 Signature Frooty
|
| The Southern Model Show | 25 Sep 2004 08:50 GMT | 15 |
The Croydon Club should be congratulated for organising one of the best shows of the year at the Hop Farm in Kent last weekend. There were over 60 traders there and a wealth of first class flyers and models. Seeing that this was only the second year of the show it's growth in a ...
|
| Tx, a change in ergomonics? | 25 Sep 2004 04:12 GMT | 49 |
My friend had landed and taxied his plane to the flight line. When he tried to kill the engine with the motor trim tab, his left thumb accidentally brushed against the throttle stick, advancing the engine to high power.
|
| Looking for RC ckubs and Members | 25 Sep 2004 03:13 GMT | 5 |
I am looking for RC clubs in the La Crosse, Wis or Onalaska, Wisconsin area. Interested in meeting members in my area. docferg@centurytel.net
|
| Clubs in Philadelphia area | 25 Sep 2004 01:09 GMT | 2 |
Am moving to Philly soon. What are my options for clubs and airfields. AMA, please. Thanks, Mike Lavender
|