Model Forum / Radio Controlled / Air Models / October 2004

Vote for change consider:
Dave Matthewson
http://www.mathewson4pres.com/
Regardless of who, please vote.

http://www.kodak.com/US/en/corp/features/sleepingGiants/
Enjoy.
David

anyone know what size engint to put in this plane?

O.K. Gang: I came back to modeling after about 5 years and no K & B resin
any more. So what are you guys using now. I have the Concepts 1/4 Fleet
Biplane. The cowel is made up from balsa blocks. I used to just coat with
the resin sand and paint. What a good alternative ??

Is it possible to assign the flaperon function to a switch instead of
one of the knobs on a fut 8uafs?..lf so please explain how todo
it..thanx
http://community.webtv.net/geobj/BJORKLAND

A friend of mine wants to try painting the fuse of his new bipe. It
will be his first time at spray painting on a plane.
Here's a description of the characteristics of polyurethane;
"Any of various resins, widely varying in flexibility, used in tough

Has anyone flown this model?  I am thinking of buying it and was wondering
what everybody's experience with it has been.

www.rcgroups.com/4590
and -- for the glider set --
www.rcgroups.com/4600
The new glider programming is so extensive -- including conditions! --

Way to Make Money TURN $6 INTO $42,000 EASILY!!!FOR REAL!!! THIS IS REALLY EASY
MONEY!! TRUST ME IT WORKS !!! BUT YOU HAVE TO FOLLOW IT TO A LETTER FOR IT TO
WORK!!! A little while back, I was browsing through newsgroups, and came across
an article similar to this that said you ...

Got a trumpet for my Zenoah 45 which is a flared tube and a flange with a
hole (+ 2 screw holes)
Am I right in assuming that the tube should be soldered into the flange.
Thanks,

Hello group.
I picked up this kit this past summer. I will  be building it this
winter. Any suggestions for 3D set-up. It looks like it might be a
good candidate. I would like any comments good or bad on this plane.

Two galleries of images from Markham Park outside of Fort Lauderdale.
http://www.pbase.com/lautermilch/markham_park
The people could not have been nicer to me.
There is some kind of show coming up so I will return and post some more.

I have a 64k Campac, l transferred a model to another Tx and returned
Campac to original Tx and said YES to the "Do you wish to inialize?".
Deleted ALL the model son the Campac.  Does anyone know of a way to
recover the model memories?

Interesting thread on another forum.  Seems there are some questions
regarding timing between AMA dues increases and the acquisition of various
high priced items.  It almost suggests something nefarious is going on in
Muncie.  Maybe a special audit is in order.  One that doesn't ...

All though the manual doesn't mention the issue I will be fuel proofing the
firewall of my H9 Twist. In the past I would fuel proof both the exterior
surfaces and the fuel tank compartment with a couple of coats of thinned
epoxy.