Model Forum / Radio Controlled / Air Models / January 2005

airplanes and helicopters. I need three articles of 1,000 words each. I
will pay for these articles. I need them by no later than Sunday
morning this week. I know this is a fast turnaround, but if you can
help, I would really appreciate it.

Just finished a website on how to sheet foam wings.
Check it out.
http://mackrc.net/patternwings2/index.htm

What magazines are out there that cover RC airplanes now?  My interest is
exclusively electric if that makes a difference.
Matt

Can anyone direct me to accurate, fairly detailed CAD models for RC
servomotors and accessories, like horns and such? I prefer 3D formats
(IGES, SolidWorks, STEP, etc.), but DXF is fine, also.
With everything people are doing with these components, I'm surprised

EBay item number 5947613008. There are five left. Good luck.

 I recently bought a used Cub and the person who built it used one servo for
each aileron (instead of a single servo for both like the instructions said).
He wired them both together so that they run off the same channel on the
receiver.  He said he did this to make the plane more ...

I've obtained a second hand TT GP42 2 stroke glow engine, unfortunately
without manual!
I would like info on recommended fuel, glow plug and starting position for
the mixture (ie. 3 out etc.). Any info on this engine at all would be

I'm in the middle of building an A-10 from MAN plans (plan #FSP 08922).
Plans call for the cowls to be made out of two liter plastic soda bottles
plus the black plastic bases that used to come on the soda bottles. I've
searched high and low for some of the plastic bases but so ...

Subject: Make Money Real Fast ( THIS IS NO SCAM IT IS FOR REAL)
Message:
GREAT WAY TO MAKE MONEY-READ THIS!!!!!!
HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE YOUR LIFE! I

I just came across the website for a video called "hunting for bambi".

genres of cable networks, but also comes across as a misogynist
celebration of gun culture. Does anybody have any insight or opinions

I am looking to buy a lightweight receiver, and it would make sense to have
one that was full range with error detection circuitry. This seems to give a
choice in the UK of the Schulze alpha-435 and the FMA M5. Discussions in RC
Groups seem to favour Berg Receivers, these being made ...

    On Jul 25 1997 Lyman Slack posted in reply to someone else,
You sure are making your life complicated! Engine guru Clarence Lee notes
that
as an after run oil, MARVEL AIR TOOL OIL is all you need. Period. He assumes

What's the determining factor for using either a regular or heavy duty radio
system switch?

I have a version 1 Raptor 30 that I'm needing to sell.  Wonder if
anyone could comment on the "street value" of this ready-to-fly setup:
Raptor 30 v1
OS 32 SX

I am keen to have a go at flying off water Is there anything on the net that
will advise me how to fit floats with regard to c of g etc  and suitable air
frames