Model Forum / Radio Controlled / Air Models / February 2005

I'm ready to begin building a second plane.  I've done with a Nexstar with
the aids all taken off, and want to graducate to something more interesting.
Goldberg's Decathlon ARF .61-75 looks very interesting.  Anyone with
experience in building and flying this plane?

After been attracted by the unresistable price of £69.99, I now have
the pleasure of owning a Blackhorse Sukhoi. My only regret is not
taking time to do my research on it before parting with my cash. Enough
of moaning...

Does Dymond's web site work for anybody else?
 http://www.rc-dymond.com/
I've tried Mozilla and Firefox, and none of the links do
anything except reload the main page.

Anyone know of a r/c helicopter shop in the midlands?
Thanks
Michael

Hi, I just wondered what happened to this NG?  Used to be a lot
of commenting, comradery, good jesting about two years ago.  
Lots of talking of flying, what's good now, how it used to be,
etc.  Now it seems kind of dead.  People burnt out from the

Thanks who give me some information on the last post but I still doesn´t
know how I do the conections on nipples Pump.
The foto shows the 4 nipples on pump, the 3 are conected to carburator, the
2 say "in" this is the fuel in I think and the number one say "R". This last

Well, not entirely true, I've been flying 3 channel electric gliders
for awhile.  But, this was my first nitro plane, a .60 Alpha Trainer.
I've had the plane for two months polishing, admiring, and "breaking
in" the Evolution .61 engine.  Since our rc airport is closed because

I have one of these Kyosho Stearmans powered by an RCV58 engine swinging a
12 x 6 prop.
All it wants to do when the power is applied is loop.
To get it flying level 15mm down elevator is required and more if the tap is

Lately I've been getting a LOT of requests for these placards, so I thought
I'd show some of them to the group.
See them here, if you like...
http://www.customcutgrafix.com/special/Caution.jpg

Just a thought as I am new to building models. What is the cure when you
glue your fingers together with superglue?
Came awful close a couple of times.

Im tellin yah it workx and its so worth it
Turn $5.00 into $50,000...read this to find out how!!!
READING THIS COULD CHANGE YOUR LIFE!!!
I found this on a bulletin board like this one and decided to try it.

HI All,
Does any one know if there is a plans archive anywhere that might have
saved any of the old RC Sportsman Magazines airplane plans. Is  there
Any currently published magazine that may bought the rights or took

I've flown my Wingo for a while now and my flying has progressed.  So has my
plane collection.  My Wingo is still fun to fly now and again, but I thought
I'd like to spice things up a bit.  Floats!  I noticed from the
manufacturer's website (Conzelmann) that they seem to be out of ...

Any suggestions on the best way to secure the battery in a sig se.  Do
I just wrap it if foam and stuff it under the sevro tray?  Fred 123

You know, I just went to the HS and bought a new glass filled motor mount for a
plane.  Now, all I, or anyone else that I know of uses to mount the mount to
the firewall is a 4-40 or 6-32 machine screw and blind nuts or something
similar.  As well as the motor to the mount minus the ...