| Thread | Last Post | Replies |
|
| Death nell of Nitro?? | 28 Mar 2005 15:27 GMT | 233 |
Have a look:- http://www.newscientist.com/article.ns?id=dn7081
|
| Auto takeoff/landing for an RC plane | 28 Mar 2005 15:02 GMT | 19 |
Is there any autopilot capable of performing auto take off and landing of fixed wing large RC plane ?
|
| Kavan Variable Pitch Propeller | 28 Mar 2005 05:11 GMT | 2 |
I would like to hear from anyone who has a Kavan Variable Pitch Propeller. I don't necessarily want to buy one (though if they want to sell it then I might) I just would like to get a general description and find out about the operation of it.
|
| (",) Do You Want To Know For Sure You Are Going To Heaven? | 28 Mar 2005 03:27 GMT | 4 |
http://www.want-to-be-sure.blogspot.com << Click On Link
|
| Plans or kit for 1/4 scale Piper Cub | 27 Mar 2005 22:29 GMT | 5 |
I have spent a fruitless hour or more searching for 1/4 scale plans or kits for a Cub or Super Cub. I thought that Great Planes and SIG or even Hangar 9 did a 1/4 scale kit but though i can find some of these on U.S. sites the size prevents them from being sent to the UK. Does ...
|
| Pinking shears | 27 Mar 2005 21:41 GMT | 2 |
I am building a 1/5 scale model of a Piper Colt. I am planning to cover using Dacron material and paint with dope to match my father's full-scale plane. I am looking for some pinking shears that will be at least semi-scale for doing the covering... Any sources for scale pinking ...
|
| Venue for RC Flying - Idea for consideration | 27 Mar 2005 03:13 GMT | 8 |
Let me know if I'm smoking dope here. What if ... 1) there was a field intended for RC flying 2) there were 2 air traffic control towers, one at 5%
|
| IMAA's Marez on parallel battery systems | 27 Mar 2005 02:53 GMT | 6 |
Eloy Marez writes in High Flight, Spring 2005 "ON THE SAME SUBJECT, somewhat anyway, is the use of a backup battery system. I know it is commonly thought and done that the best (read: cheapest!) way is simply to plug another battery into an unused servo socket
|
| Flaperon help with JR XF421 | 26 Mar 2005 20:23 GMT | 5 |
I've got a hotliner sailplane I'm getting ready to put in the air. Another club member had one like this and said it was hard to get it on the ground. So, I thought to myself - I'll use the flaperon mix available in my XF421 TX to help with that problem.
|
| Doubler airplane | 26 Mar 2005 18:14 GMT | 2 |
Don't even have the maker of it but it's called a Doubler. Has no rudder but two fins on each end of the stab. Does anyone have the correct CG location. thanx
|
| J3 Balsa USA -motors & flaps? | 26 Mar 2005 15:38 GMT | 2 |
Following up information derived here and having contacted Pegasus Models, they do what sounds like a very nice Balsa USA kit for £169. They say that this kit outsells other brands that they do. Has anyone built this and if so, which 4 stroke motor did you use? Has anyone ...
|
| Homelite 25cc porting | 26 Mar 2005 15:31 GMT | 9 |
Can anyone recommend a good (working) link that shows how to port a Homelite 25cc engine for more power. This will be going into an aircraft and I believe the porting will make a significant difference to power output. Regards
|
| Images: FJ-4 Markham Park | 26 Mar 2005 04:47 GMT | 2 |
http://www.pbase.com/lautermilch/fj4
|
| Battery for Super Sportster EP | 26 Mar 2005 02:45 GMT | 4 |
A fellow modeler in my club has the 48" version and is looking for a LiPo or NiMh pack to replace the stock 7-cell 2100 mAh pack. He's not interested in burning up the sky but just wants something that will give him pretty good duration and a modest improvement in performance. ...
|
| KOMET | 25 Mar 2005 22:51 GMT | 1 |
Anyone know of a R/C model of the ME 163 WWII German rocket powered fighter. V
|