Model Forum / Radio Controlled / Air Models / May 2005

I'm on my first model.
Almost finished e hawk 2000.
I have a problem I have a ripmax 35 speed controller(no instructions)
The connections to the elec motor appear to be correct. The motor beeps when

Getting ready to fly a new foamie (e-foamie Revolution 3D), with the
recommended AXI 2212/26 motor, Phoenix-25 ESC, Kokam 3C 1500mah battery, and
using the recommended props of either a 12x3.8 or 11x4.7 the current draw at
max throttle drops the battery voltage to hit the 9V ...

Fellows: I have an nylon engine mount (broken in a crash) and it is
somewhat different from the Dave Brown and Kraft mounts. The holes for
mounting it are a perfect square and the only markings on it, other
than the size engine it is made for, is BHE.  The local hobby shop

I have a GP Wright Flyer that I want to steal the ESC out of for another
project.  However, I can't seem to find any info on how many amps, volts,
etc. this particular unit can handle.  I've tried looking it up at GP's web
site, Tower, etc., and none of them has what I'm looking ...

I need some help from some body who has built this Arf plane. I picked this
plane up for a low effort sit back and enjoy type of plane. Man, was I
wrong, I can barely fly this thing. I am thinking that the CG is off.. I
went off the range the book called for but it just will not fly ...

Does any one have or know where I can get plans or a design for a R/C
Field Table? Preferably with aircraft hold down ability. Pls contact me
on or off list .
Allan   

REALLY super photos of some of the very best giant scale birds of all types.
http://www.rcgroups.com/forums/forumdisplay.php?f=239

Sunshine at last ! More to the point that damned cold wind had eased
down as well.
Took myself off to a new stretch of moor that I sussed out a while ago.
Slope drops off sheer into a valley below and the views are outta this

Put together a new E-foamie Revolution with AXI motor, and Castle Creations
Phoenix-25 ESC, all new, with a Electron 6 receiver that had been working
fine...
Got to the smoke test phase of applying power, and everything seemed to be

regarding the previous thread about modding a slow stick, i'm wondering
which one of these lends itself more to modification, and has more parts
available to do that.  i just cracked another fuse on the slo-v when i
installed an aerobird extreme wing and hit a gust of wind on a ...

Can anyone give me a close placement for the servos?  Once the wires are cut
that's it.
Thanks
Mark

I have bought a used Sig Liberty Sport.  Does anyone know what the CG
position is??
Bill L

Ive just bought a Graupner lipo charger 4 and am using it to charge up
1600mAh packs.
There are no Amperage controls on the charger and it is supposed to
auto detect the cells, but when I charge a pack it takes over 2 hours

I am upgrading to a laser cutter so have a 1 year old Step-Four CNC system
for sale, it includes
www.step-four.at
Step-Four Basic 540 Machine

A short while ago it was mentioned on here that Flair had ceased to be.
Possibly they had been swallowed up by ??? (forgotten who was mentioned)
What is the position with Flair ? I haven't seen any comments since.
Curious bystander, who liked the Flair kits that he built.