Model Forum / Radio Controlled / Air Models / May 2005

I am finishing a SuperStunt 60 that I bought part completed, but without
a manual.  So far so good, but I am not sure about how to set up the
flaps.
My JR3810 has a rotary pot that I could use for setting the flaps, but

I'm hoping someone can help me with this as I have been out of the hobby for
a while and have decided to take it back up again in the form of
slope-soaring.
I have settled on purchasing an Irvine Pixie

After 8 years online I've just had my first email weirdness - at the hands
of Gary.
He posted an add on BMFA - some Logo heli parts for sale at £10
I responded by email.

I couldn't find a group for nitro cars or trucks so I figured I might ask
the question here as the issues I'm having are with the motors themselves.
I am relatively new to the hobby but have been an auto mechanic for years
and years, so familiar with all the pieces parts and what ...

I am trying to find a mini reciever, at least six channels, for a Funtana
that........no bull......I've actually experienced it.......will work with a
Futaba 9Z SYNTHASIZED transmitter.
I have several that will work with the 9Z when it has the fixed frequency RF

The post concerning carciginens in fuel was very informative, but I have
heard quite a lot abuot the harmful effects of epoxy and Zap adhesives.  Do
you think there is any validation to this or will the Ostriches rule again??

While at Top Gun,I spoke with a master scale builder who has use
Coverite(at the request of the owner) for over 15 years. However, h
has had trouble with recently purchased Coverite which ,he says,doesn'
stick like earlier purchases. He claims that Tower has changed th

Have a friend who is looking for a PICA/Platte 1/5 scale Waco or a
similar round nosed kit for a 23 to 35 cc motor.  Any suggestions would
be appreciated.
Thanks

Anyone wanting a good pair of binoculars might find a quick visit to a
local Lidl store worthwhile.
Meade (same company as wot makes the quality astronomical gear) 10*50
binoculars. Rubber armoured, substantial piece of kit, very precise

This is a question for old Graupner sailplane flyers. I picked up a
Graupner Foka from somene in my local club who can't see to fly
anymore.
Does anyone have the proper CG for this plane? I'm tempted to use 35%

as a slim chance I thought I would ask does anybody have a working speed
controller board for a Esky honey bee 2 CCPM helicopter, mines gone and
frazzled its self the main motor runs flat out as soon as the battery is
connected, if not its going on Ebay in bits as spares

In a SIG Kadet Senior, should I build it with or without right thrust?
D.

I was attending a very large radio control show in Toledo, OH over the
course of last weekend. And made arrangements with one of the distributers
to start carrying the Micro Cam II Video Camera system. We have these units
up for sale on our web site.

I used up the limited supply of .3 mm wire that came with my wind
-it-yourself brushless motor kit, What size wire is this in the AWG
scheme?  The conversion sites seem fine if you are converting ordinary
measurements but can't find wire guage.

Just got me hands on one in very nice nick and yup have measured the
wing but want to know the best place for c of g ...perhaps a tad forward
might be the order of the day.
input chaps (Y)