| Thread | Last Post | Replies |
|
| Never Lose Your RC Plane Again!!!! | 08 Aug 2005 20:03 GMT | 8 |
I have a nifty little design available to help you find your airplane in those tall weeds, corn, beans, or wherever it unexpectedly lands. I have developed this design using state of the art microcontrollers which actually run software that I've written. The whole unit ...
|
| Anyone fly today? | 08 Aug 2005 18:04 GMT | 8 |
I'm stuck at work, (9an-10pm shift) What did you fly. What else was at the field today? mk
|
| GWS A-10 weight/balance | 08 Aug 2005 13:36 GMT | 1 |
Been working on the GWS A-10 and had to add several ounces of nose weight to get the balance point near the recommended point. Now the thing weighs something like 20 oz. instead of the 12 or so it calls for... Is it gonna fly? Has anyone else had this problem? What did you ...
|
| AMA and insurance claims | 08 Aug 2005 10:21 GMT | 100 |
Pure curiosity question. Has anyone filed an AMA insurance claim? I have not. Nor do I know anyone who has. I learned at an outlaw field. It was under development. I came
|
| Canopy/cowling Quick Disconnect | 08 Aug 2005 03:01 GMT | 3 |
I'm about to finish a Stinger 60 Kit. On this particular Kit the canoy is attached to an ABC piece which is then screwed onto the fuselage after the wing is installed in the field. I suspect after repeated use, the screws might loosen and fall off. Some time ago in the field I saw
|
| old radio question | 08 Aug 2005 00:01 GMT | 4 |
i've got an old futaba challenger radio set with a fp-r105m receiver which i want to use with my ff6 tx have swapped the xtals ok but cant get it to work,are these old receivers not compatible with the newer type?
|
| first flight disaster????????????? PLEASE HELP!!!!!!! | 07 Aug 2005 23:43 GMT | 7 |
i just got my new firebird scout plane today in the mail. did everything the video said and tried to fly it but everytime i threw it up it would go about 10-15 feet and dive straight to the ground. it never tried to climb. please help me.
|
| Frequency interferance and TV stations | 07 Aug 2005 23:32 GMT | 24 |
I have been to several fields and noticed that many do not allow flying on Ch. 20 or 21 (can't remember for sure). I've always heard this was due to television interference from the local Ch 4 television transmitter. Can anyone explain the technical details on this? Why that ...
|
| OT, look out Tiger! | 07 Aug 2005 17:51 GMT | 1 |
http://reuters.myway.com/article/20050802/2005-08-02T145938Z_01_SEO354863_RTRIDS T_0_ODD-KOREA-MEMORY-DC.html
|
| RC Air Activities at Kota Kinabalu | 07 Aug 2005 14:41 GMT | 2 |
Found new sites introduced by Jamal who now works for Kk HOBBY SHOP to promote the selling of RC Airplanes. 1) Tanjung Aru Beach, between KYC and Shangrila Tanjung Aru Beach Resort Hotel.
|
| Crankshaft removal tips needed | 07 Aug 2005 04:58 GMT | 9 |
I have a Magnum XLS .40 2-stroke, with a single-piece crankcase, which was in a crash I had last week. The engine took quite a bit of dirt, which got into the carburetor. Several of the other guys in my club suggested I disassemble the engine and clean the inside with denatured ...
|
| Woodvale this year | 06 Aug 2005 19:09 GMT | 2 |
....Rubbish. Flight line a shadow of it's former self. What there is is the same old recycled stuff. Came home early.
|
| Field Force 7 Instructions | 06 Aug 2005 18:18 GMT | 2 |
Anyone have any ideas where I can find the insructions for my T7CP Tx on the net? Romelluk
|
| MVVS 26 IFS gasoline engine? | 06 Aug 2005 17:58 GMT | 3 |
I am planning to buy MVVS 26 IFS gasoline engine (known also as Evolution 26 GT in US). http://www.der-schweighofer.at/web/productdetails.php?artikelnummer=47607&prodID=394 Does anybody have this engine? What are yours experience with it? Is it
|
| F-27 Stryker--I can't see already read threads so made a new one. | 06 Aug 2005 16:50 GMT | 8 |
Looking for a hop up site for the F-27 stryker, I asked once already and was pointed to a Forum that wasn't really what I was looking for, already been reading it for a few days and hasn't really helped me much. The people there don't really want to help me because I am new to ...
|