Model Forum / Radio Controlled / Air Models / August 2005

Does anyone know where to buy a Weston 50 manifold split mine today whilst
flying don't know where to get one.
Thanks in advance
Mark

How Important is the Selection of a Trainer?
First, I should define a couple of terms. When I refer to balsa, I mean
the typical balsa lite-ply RTF or ARF. When I make a comparison or
contrast, it will be to a similarly sized model. Perhaps the best way

Hi all..
Whats the best way of sticking existing covering back onto balsa.
The covering on my Thunder Tiger Trainer is coming away along the join
line where the covering meets the plastic top section of the fuselage.

I've often seen and think I've read about a particular setup on aileron
servos that I'm curious about and want to know if it's best and why.
I've seen servo arms that are less than 90 degrees to the control rod when
the ailerons are level. I would assume the movement of the ...

I am building my second electric, (GWS PT-17).  Could someone out ther
tell me the best way to apply the adhesive decals that come with thes
kits.  I am a very experienced plastic model builder and I am familia
with conventional film decals but I would like to know how to set th

Who said they didn't have any.  Picked this jewel up from the
uk.rec.models.radiocontrol.air newsgroup.
"hello all
came into a bit of money a while back and i've always wanted to have a go at

I am thinking about purchasing a stryker. Please tell me your thoughts
views, and experiences with the bird!
Thank you! :
--

Assuming the bottle is capped, how long should a bottle of glow feul be
okay to use after you break the seal?  A year, Two years?
Gasoline "goes bad" in 3-6 months but how about glow feul?
Thanks

Currently flying a Flair Extra 300S with a Moki 135. Flies fine but I
don't think the engine is running as well as it could. Can anyone
recommend which type of plug I should use for this engine please?
Currently running on OS 8 but local dealer reckons OS A5 would be

The recent discussion of the possible demise of RCM has gotten me to
wondering how it is that so many R/C magazines now have female editors.  
RCM has one, MAN has one, the Managing Editor of MA is a woman, and
there's the "power behind the throne" at RCR, Mina.  ;-)  While there

What's the best way to remove excess epoxy from a model?
Regards
Seymour.

Don't read if you don't like "AMA bashers".
Just got a call from my friend Randy.  He has informed me that the
county has officially changed their policy.  They now accept $250,000
worth of homeowner's liability as the minimum requirement for a flying

 can any one recomend a good place to shop.. online.
I live in DK  and the prices here are sky-high. ( Tax i guess )
Martin

Currently flying a Flair Extra 300S with a Moki 135. Flies fine but I
don't think the engine is running as well as it could. Can anyone
recommend which type of plug I should use for this engine please?
Currently running on OS 8 but local dealer reckons OS A5 would be

How do you know when you've found a good place to secure your engine to its
mount?
Regards
Seymour