Model Forum / Radio Controlled / Air Models / September 2005

Does anyone have one of those JR/Galaxy NER-J329P receivers that was
sold originally by Circus Hobbies?  It has a plug in module J329M.
Any frequency is ok, but I need it BAD!!!  Anyone have one to sell or
trade?

Can some kind and clever soul tell me how many nauticle miles between
the following GPS numbers:
Lon East  138 deg  48.889
Lat South 35 deg 38.012

http://tinyurl.com/clbld
Please ignore the ebay auction, unless , of course, you need a 16x8 prop!
P

Anyone know a supplier of Thunder Tiger spares? Preferably online if poss!
Cheers
Mack

does any one have the full tech.spec-sheet for futaba 3003 std.servo
I can only find info about fork and speed. ( looked at futaba and tower)
i would like to know how big an operational range the 3003's have.
I have just mounted one as a retract servo and when forcing the servo by

how do you pull out a cylinder sleeve out with out backing anything
i have a .o.s .20 and the cylinder needs to come ou
--
kurtlasle

I recently purchased my first plane ( been flying heli's)
It "was" a Phoenix Classic 40 trainer.
On its first flight a strong gust of wind flipped it over and sent it
crashing nose first into the ground. Damage was smashed front and totally

I just finished putting up a site for a rather special aircraft.
I think quite a few of you may like such a machine...
I would appreciate any feedback good or bad (Syntax, grammar, content,
product, pricing , flame etc...)

Recently I purchased an OS 40 FX to replace the OS 40 LA on my
Duraplane T-40. The 40 LA did a fine job getting the T-40 off the
ground, but I was curious about how the 40 FX would perform. Well it
runs like a rocket, and the T-40 now rotates in a few feet rather than

People who advertise stuff for sale online but then don't respond to emails.
It's probably because its sold but then why can't they be bothered to update
the advert or at least have the decency to reply to my email.
I know I should rise above it but it really niggles me.

A few years ago at a field in Northern California I watched a guy fly a twin
P-51 Mustang. It had two mustang bodies held side by side on a center mid
wing. I never got to talk with him so don't know if it was something he
built custom or a kit. Does anyone have any knowledge of ...

I have flow'n 2-strokes for a few years now and decided to give the
4-strokers a go.....and starting to regret it :-).
My brand new OS -fs52s, won't run without glow power..
it starts fine (after priming) and runs and rews as it should ( needle is 2

   I have a friend running the new Hanger 9 PTS P-51. With  DS537 Digital
Standard Servos in the plane, with the  R700 7 Channel FM Rx. We are wanting
to know if it is ok to run 6v on these servos and Rx. Thanks for the help.

--
1. Very Important: ...The C.G. is located 1-1/32" [26mm] back
from the leading edge of the wing.

Will this work?
tia