Model Forum / Radio Controlled / Air Models / December 2005

I'm looking for the plans for this model. If anyone in the ng has a set
they'd be willing to part with, I'd appreciate hearing from you. I'm
interested in buying the plans, or borrowing them long enough to visit
Kinko's & get a copy. I'll pay for the postage both ways.

I am new to RC helicopter flying.. infact i purchased one but couldn't
fly it yet!
Once i switch on the helicopter Top Blade is not rotating. (my
helicopter brand is bighead)But once i give speed using the remote

I just bought a Quick Field Charger Mk II, and when I charged my Fut 8U
it stop charging it (in goes in trickle mode) when it reach 9.5 volts
while my original charger charge it over 11.5v to 12v.
is this normal, is it a way to allow my Quick Field Charger Mk II to do

My name is Dan.
I'm a friend of Marty Moleski's.
We've been flying at the Wing and Rotor field
since 1995 or 1996.

Anybody know the recommended control throws for the tail surfaces on the
Goldberg Extra 300?
I've finally rebuilt mine after elevator flutter took it out 12 years ago.
Thanks,

Several weeks ago there was a post here concerning finding old-time
stick model kits.
Here is a place to go. Penn Valley Hobby Center, 837 W. Main St.
Lansdale, PA 19446.

Is there anything that you can do to separate/help/soften or otherwise
unglue a previously epoxied join. I epoxied some weights to the tail section
of a model( to the covering) that was extremely nose heavy. I have changed
engines to a lighter size and now the model is tail heavy ...

Where do I buy cheap nitro engine for my airplane on the net?
Henrik
Denmark

Hey guys I just picked up the Hanger 9 Extra 260 ARF and plan on using
a DA50 on it.Any suggestions on muffler DA50 standard or Pitts? What
type of servos would you suggest for my Futaba radio?
Any other hints or tips would be greatly appreciated.!!!!!!!!!!!

Can anyone recommend a supplier preferably in the US who sells the
Spring Air retracts (302) please?
TIA
cheers,

Hi, I have been given a Kyosho Ag-Wagon which is in resonably good condition regarding its age but the wingtips have been damaged in storage, I have tried various sources but cannot locate any and wondered if any reader on this newsgroup might have some spare lying around.
Kevin

Just about to build an AMD Hawk and wanted some advice on which
retracts to fit. The manual shows the all up weight to be around
9.75lbs. Any suggestions? I am based in the UK but I can get items
shipped from the US if required.

I know that i could be opening up a can of worms with this question but i'm
in two minds,
I have previously flown Control Line stunt for a number of years but i am
finally looking to move over and try my hand at R/C.

When you read about a certain motor and it says that it's for, say, up to a
15 oz plane ... Is that the all up and ready to fly weight, including their
motor and a battery to power it or does it mean, take our motor and battery
and put it into your 15 oz plane?

I posted about using the Super Cobalt 400 motor that came with the Wattage
brand , Pitts that I'm working on. I was also asking about using the "KMS"
31/21 brushless instead. Well, I took some of your advice and bought a Tanic
3 cell, 1550 mah, I think it is. It's only 4 oz as ...