Radio Controlled - radio-controlled air models

Thread preview

Thread	Last Post	Replies

What happend?	30 Apr 2006 17:16 GMT	20
Why does this usenet now have no topics? Wan
stripped muffler bolt	30 Apr 2006 02:25 GMT	9
I just purchased a used OS .46 SF on eBay last week, and it ran great for the first 5 tankfuls or so, but one of the muffler bolts came loose in-flight and the engine died from lack of tank backpressure. Put the bolt back in, tightened both, and it happened again next flight. ...
Ailerons ineffective in high wind?	29 Apr 2006 23:52 GMT	57
I am trying to recall what happened. I did a ground check and everything seems to be OK. As close as I can get it, I'll describe what took place with my trusty electric airplane. I took it off into the wind and the plane rose rapidly into the gusty
Royal Pitts Special	29 Apr 2006 20:01 GMT	2
I could say much both pro and con about our relationship with Japan in this day and age but suffice to say we now have many other threats much more dangerous and I'm not sure if some of the biggest threats to this great nation of ours aren't ourselves.
Phil Kraft	29 Apr 2006 16:20 GMT	11
I just found out that Phil Kraft passed away on April 9th. Alzeimer's apparently.
SU-31 plans	29 Apr 2006 10:49 GMT	2
I need some 3 view drawings hopefully with cross sections of the Sukhoi SU-31 for an RC model. Anyone know a site that has SU-31 drawings in any CAD format or large TIFF or JPG? Thanks
Where to get slow stick?	29 Apr 2006 06:06 GMT	4
My coworker is having prob finding a slow stick plane. Where can he get on web? He says it is a popular model and out of stock everywhere. regards, Blueberry Muffin
Cleveland Model & Supply, experience with	29 Apr 2006 03:34 GMT	3
How long does it take for an order to arrive? I up to two weeks on my first order from them. They said it would ship within seven working days. Nothing yet, and their phone number is a recording. I'm just curious.
Futaba 6xas on 6 m worth anything to anybody? what are they even worth anyhow?	28 Apr 2006 23:23 GMT	6
I have just become the new "ownee" of the Futaba 9C...in other words the radio owns me..(well for the moment) This a wee bit more radio than i neded, But having made the decision(sometimes i think it wasn't the smartest idea, other times i could not have made a better
The best store with clothes for pilots - EMBROFLY.com	28 Apr 2006 14:31 GMT	10
Welcome to our internet shop EMBROFLY.com You must see that. http://www.embrofly.com/?lang=en High quality and low prices!!!
Spektrum receiver work with any servo?	27 Apr 2006 18:58 GMT	7
Wondering if Specktrum DSS receiver (AR6000 DSM DuaLink 6-Channel Park Flyer Rx) will work with any other brand servos? Particularly hitech? Thanks
Slowstick question and need recommendation for transmitter...	27 Apr 2006 17:13 GMT	11
Hi, all: First thanks for taking time to read this thread. I read a lot of web sites and FAQs already but I'm still a bit confused. I just got into the RC hobby and have got myself a Blade CX RC helicopter (RTF with
what size servos?	27 Apr 2006 09:28 GMT	2
I've just ordered my very first ARTF, a Seagull Harmon Rocket. Can anyone tell me what size servos (physically) the fuselage accepts at the rear for elevator/rudder control. I may have to get some new ones. Many thanks
Modelairplaneshop in Seattlearea	26 Apr 2006 22:16 GMT	1
I used to visit a great shop Nortwest Hobbies in Bellevue Seattle. A friend tried to visit them but was told that they had gone out of buisiness. Is that so or have they moved? Is there any other good shop with modelairplanestuff in Seattlearea? Thanks for
Workshop supplies	26 Apr 2006 20:19 GMT	7
I have used in the pas an EXDELLENT supplier of workshop bits. They sent out a thick grey catalogue. I THINK they are the ones who "will say this only once". Who are they, anyone know???