Model Forum / Radio Controlled / Air Models / May 2006

From Auburn GA.
RCU user name Milton.
     Alert - Trailer and planes stolen
--------------------------------------------------------------------------------

There i was, thinking to myself, 'where can i go next Sunday', i thought,
yes i'll go to Sandown. Then i got to thinking of the last time i went to
Sandown, on a chartered, organized bus trip, this should be good, i thought.
We got there at 10am after 2 1/2 hrs travelling, to find ...

Can anyone tell me a step by step foolproof (?) method for measuring,
cutting and installing a cowl? I always end up with the either the needle
valve or muffler holes off and its looks like hell. I'd certainly appreciate
it. Its a fiberglass cowl, not ABS.

After many years flying diesel and glow models - and dabbling in
electric flight using cheap brushed motors - I have just bought my
first brushless motor for a new electric model (Miss Hanger One).
I fully realize that BRUSHED motors need to be suppressed by soldering

Can someone tell me where I can get some foam wing cores cut?
Thanks in advance

Is it worth it this year,can any body review todays show
thanks in advance

I found out that my trusty hobby knife cuts more than just balsa but
can cut the umbilical cord to a newborn........
   Now let me back track a bit......Sunday, April 30th I got to the
field at 8:30am with my 25oz wing. It was a bit windy, about 15mph.

Hello all,,
The LHS  is running a sale(like most, I can't  resist one)  to clear
out some intentory  the above mentioned planes  are 10% 20%(with
membership to any local club)off...  I am JUST climbing on the ladder

too late at night  -  it is a Veron Concord r/c kit on ebay, link below
apologies for confusion
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=6059873365&rd=1&sspagename=
STRK%3AMESE%3AIT&rd=1

I used to have a dos basic program that, if I put in the span of the
wing and the total dihedral in inches...say each panel of a 48 inch
wing was raised 2 inches, this program would give me the angle at the
root....which is handy for setting up a table saw to cut the thick

I used to be very up to date on all the latest and greatest upgrades for the
PC back when the PIII 's were hot, but since then I've lost touch and I have
no idea what generation of laptops will work well with G3 which seems to be
pretty demanding.

If interested , please click on ebay link.
thanks for looking
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=6059873365&rd=1&sspagename=
STRK%3AMESE%3AIT&rd=1

If interested, please click on ebay link below.
thanks for looking
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=6059873365&rd=1&sspagename=
STRK%3AMESE%3AIT&rd=1

Need to find a round fiberglass cowl about 9 inch round and about 5.5 inch
long
thanks
Dave

does anyone know who sells the  60 size p-26 peashooter arf