Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / Radio Controlled / Air Models / May 2006



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Irvine 53 - extremly tight at TDC18 May 2006 00:28 GMT8
I have a brand new, never run Irvine .53 (i.e the red one), bought at the UK
Nats last year
Problem is that, now I have put a prop on it, I have discovered it is
extremely tight at TDC. In fact it is so tight it feels like there is a
Firebird Freedom as my first RC17 May 2006 22:31 GMT11
I am new to electric RC airplane and want to buy my first electric
plane (I actually had another ~25$ electric RC, but it is such a "toy"
with poor control). From reading the postings, I am consider buying
either a Firebird Commander or a Firebird Freedom. I am actually lean
3rd party insurance17 May 2006 21:32 GMT2
Anyone know if there is an alternative 3rd party insurance for model
aircraft. Does AMAP still exist?
Signature

Rick

Electric Flight17 May 2006 10:09 GMT8
I going back into model flying after a break of a few years and am looking
at getting into electric powered combat wings.
I really fancy a brushless setup and Li Po batteries seem to be the way to
go?  Reading up on the subject, however, I am a bit perturbed at the
Wallpaper foam17 May 2006 08:51 GMT2
I am trying to find where to buy wallpaper insulation foam as I found out
about from here:  http://www.aeronutz.flyer.co.uk/materials.htm
I tried google but no luck.  Help please!
Thanks,
Giant Scale Super Sportster17 May 2006 08:48 GMT2
I actually tripped across this while looking for more information about the
upcoming Goldberg Tiger 120:
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LNLYC5&P=G
It's a giant scale Super Sportster for 1.20 to 2.00 cu in glow or 2.00
Budget receivers17 May 2006 02:48 GMT6
Evening All
I am amazed that I can find micro rx's from £12 upwards but I can't find a
standard size rx - with a standard range for less that £25.
I flew with Micron rx's for years but I can't seem to find them after their
Sad accident in Europe16 May 2006 15:06 GMT2
http://www.aero-news.net/index.cfm?contentBlockId=4ff78a25-c9ad-4734-8286-ae6467
f2600a#d

Sad news16 May 2006 06:56 GMT6
An radio controlled 1/2 scale Pitts crashed into the crowd at a
Hungarian model show killing two spectators and injuring four.
The video footage shows the model doing a slow left hand roll fairly
low down. Fortunatley it does not show the actual impact. It suggests
Storage15 May 2006 15:48 GMT7
I have moved into a new hobby room.  Does anyone have any good ideas on
how to store models efficiently.  i.e. wing shelving, or ceiling
strings.
Mike
Like an old shoe15 May 2006 13:18 GMT14
Do you have one of these?  I have this little electric airplane that
has been repaired for the 13th time. Unfortunate things such as
interference, lost of signal, figure 9 loops, on the ground collisions
and plowed cornfields etc, have made this plane the most endearing
RMX engines - any good ?15 May 2006 08:13 GMT2
I've a friend who's contemplating trying out the hobby and I see that Als' have
a starter set including a TT40 trainer + 6EXA radio (inc Nicads) and an RMX 40
engine all for £209.  The only thing that stops me recommending this setup is
that I've never come across the RMX engines ...
Anyone flying the CMP P-40 140?15 May 2006 03:43 GMT13
I just ordered this ARF and was curious as to if anyone reading the
newsgroup has any experience with it.
I've been a P-40 fan since childhood. The "Flying Tigers" movie and "Fowler
Patrol" (I hope that's the right name) piqued my interest as a youth. I was
Futaba tx repair?14 May 2006 12:52 GMT12
I have a Futaba t6exap Tx which needs repair.  I guess it must have fallen
off the cupboard but no one is owning up <g>
The plastic "axle" connection to one of the potentiometers ( I guess that's
what it is) on one of the joysticks has broken, so, although the stick
Lanier 60 Stinger ARF13 May 2006 20:33 GMT6
Just ordered one from Tower. Does anyone have any suggestions as to weak
areas, improvements, add-ons, etc? Many thanks.
Signature

---------------------------------------------------------------------

Pages: 1 2 3 4 5 6 7 April, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.