Radio Controlled - radio-controlled air models

Thread preview

Thread	Last Post	Replies

FormlessRC.. CHEAP ARFS!!	06 Oct 2006 21:56 GMT	3
CHECK US OUT AT http://www.formlessrc.com Cheapest ARF's on the NET!
JR receiver R790	06 Oct 2006 04:06 GMT	13
Can anybody tell me why the R790 synthesized receiver don´t work in the 11 to 14 channel? Why it only begin on 15 ???[:o]
Where did all the eBay folks go???	05 Oct 2006 02:39 GMT	11
I was heavy into buying and selling R/C stuff on eBay about 2 years ago. I'v been away from R/C getting my glider rating. I'm getting back to RC again. I just looked on eBay and there a FRACTION of the stuff there now. Where is everyone selling their used stuff these days????
Door Latch	04 Oct 2006 19:21 GMT	2
I'm looking for a sketch of the over center door latch of a J-3 Cub. Thanks, Ray
Another Video	04 Oct 2006 07:14 GMT	2
Not aerial this time but flying the same plane the way it was meant to be flown. I'll probably get verbal abuse for this one too - oh, look there are other people in the park... http://www.ninjaboy.pwp.blueyonder.co.uk/JohnBanksZoomZoom.wmv
Selling your RC?	04 Oct 2006 01:10 GMT	7
If you're selling your RC items, check out www.rccellar.com ~theLane
Introduction brushless control	04 Oct 2006 00:22 GMT	2
if you are interested in a in-depth introduction to brushless control, then take a view to this site: http://www.ibweinmann.de/html/brushless1.html best regards
Instrument Panel	03 Oct 2006 17:44 GMT	1
I was going to order an instrument panel from Goebel Custom Instruments but their site is no longer there. Anyway I need an instrument panel for 1/3 J3 cub. Any suggestion?
My first attempt at arial vid...	03 Oct 2006 15:57 GMT	2
...and it ends with a crash :( The plane (Hacker Zoom Zoom 4d) normally has a flying weight of 12 oz. With the camera, transmitter & nicad to power the rig, it was 20 oz making it drop like a brick off the throttle. Also my CofG was a tad too far forwward. I can normally land ...
Selling your RC stuff?	03 Oct 2006 14:41 GMT	1
Hey, if anyone is selling their RC items, check out www.rccellar.com ~Lane
Good model shops in North West England	03 Oct 2006 14:07 GMT	8
Can anyone recommend some good model shops near Manchester / Liverpool, for air & land R/C models?? Thanks
Designing a Biplane	03 Oct 2006 13:26 GMT	5
I am building a biplane from a plan and have reached the point of attaching the wings. This is a heavily "kit bashed" airplane. The original plan had the wings set at about 70% chord apart. My changes to the wing were to use a different, slightly thicker airfoil and to change
Modified "Aerostar" Flight Troubles	03 Oct 2006 05:33 GMT	9
My son & I rebuilt a crashed Aerostar 20 trainer. An Uncle gave it to my son after he destroyed it. We have been flying SuperStar/NexStar trainers (my son much better than I). At the time we decided to upgrade the .20 to a .40, build a fully symmetrical flat wing & convert it ...
Spirit of St. Louis kit/plan?	03 Oct 2006 04:41 GMT	4
Been searching on Google for a while and have not come up with much in the way of finding scale drawings or maybe at best find a kit that is around a 60 thru 1.2 (engine) size. I have a set of plans for a 1/4 scale, but think this may be a touch out of my skill/price range and ...
Ripoff Britain includes model aircaft world?	02 Oct 2006 20:28 GMT	49
As some of you will know I recently decided on an OS 52 Surpass fourstroke engine for my new kit project. Ripmax has been advertising these on the back of RCM&E magazine at a SSP of £199.99 so I thought I could do a little better. I looked around at some of the usual UK ...