Model Forum / Radio Controlled / Air Models / February 2007

Hey your missing out by not visiting the Builders Group.  Lots of
building tips and room for expansion.  thats rc builders group.  Doc
Ferguson

looking into getting started whats "PIT adjustment"

Got a NIB Bud Nosen Gerry Sport I'm never going to build. Great kit. 8
ft biplane. $250.00 takes it.

    Sport Aerobatics (Radio Control)
    David A. Scott, 2006
    1st U.S. R/C Flight School
    P.O. Box 212

Just ready to install an engine in a Minicraft Javelin 90.
A review model in a magazine used an ASP120 - in my view heavy. I wonderd
what any one thought of an ASP91 or SC91 which is a good deal lighter and
not that much less in power.

West Lodon Models have today opened their new Electric Flight Forum.
Register and contribute to the content today.
www.westlondonmodels.com and click Forum button on front page.
Regards.

Just ready to install an engine in a Minicraft Javelin 90.
A review model in a magazine used an ASP120 - in my view heavy. I wonderd
what any one thought of an ASP91 or SC91 which is a good deal lighter and
not that much less in power.

This is my second post about building a foam cutting hot wire.  From the
first, I found 9 sets of plans at:
http://www.uoguelph.ca/~antoon/gadgets/gadgets.htm
Very helpful.  Of course, I had to do it my way, so I put together

being at the front does a Canard with control surfaces work the opposite
way around to a normal tailplane?.
                           regards,       Terry

If you find a flying clip better than this one, I'd like to hear about it.
http://www.metacafe.com/watch/133566/trick_airplane_indoor_competition/
This wasnt me by the way. Just found it on metacafe.
Its absolutely crazy!!

Just wondering if anyone knows if there is a published set or two of
Pilatus PC-9 plans out there and where one could get them from? Have had
no luck in my search so far.  Fell in love with the plane awhile ago and
decided that I now have to build one.  Thinking around around 1/7 ...

Has anyone heard anything of Bob Adkins lately? I see Jerry Festa's posts
here and there, even though he is now living in Arizona, but I haven't heard
anything from Bob, one of the old rec.models.rc.air contributors. Where has
everyone gone?

I have a 120mm (4 3/4'') computer case fan with seven blades about 1''
wide x 1.5'' long that have the same pitch as a 9x6 prop or thereabouts,
it would be quite simple to rip out the little motor and fit a 480 but
not sure of the results, anybody out there tried using modified ...

I spent all afternoon trying to get the flaps on my Ultasick the way I want,
but didn't get it figured out.  My radio is a Futaba 9C and the flaps are on
channels 5 and 7. What I want to do is put the flaps on switch C, with no
flaps when the switch is up, and 1/2 flaps and full ...

Checkout these awesome models.