Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / Radio Controlled / Air Models / July 2007



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
alternative push-rod setups for park-flyers?01 Aug 2007 00:43 GMT4
i try to give my LHS business, but they have non-existent pushrod
selections for park-flyers and other lightweights.
ordering online is like $8 shipping for $2 of stuff.
in this case i need stuff for a rudder and i was thinking i could rig
What's the solvent in foam-safe CA?31 Jul 2007 20:04 GMT8
I have a bottle that's thickened up. Anyone know what to thin it with?
  CR
Has the UK modeling site been washed out.31 Jul 2007 19:23 GMT7
With all the flooding, has the web site been washed out?.  I know a lot of
modelers must be busy salvaging from the flood. Wish we could help.
Red S. Florida USA
good general purpose gap-filling adhesive???31 Jul 2007 15:50 GMT4
looking for something beside thick CA.  the stuff just doesnt seem
strong enough or fill gaps good enough.
2-part epoxy is awesomely strong, but mixing makes it a PITA as a
general purpose adhesive.
Recommendations for Plane #2?30 Jul 2007 19:49 GMT11
I wrote off my Firebird XL the other night.  Lost controls (RF
interference?), no throttle, no rudder (ruddervator?), just straight
down into the sun baked clay field from about 60'.  Glue and tape
isn't going to do it this time.
0.5335633 Maybe We Can Help Each Other ... 0.843321930 Jul 2007 07:38 GMT1
0.9140461 Maybe We Can Help Each Other ... 0.9674528
0.5335633 Now Visit http://www.clicklinknow.com/ss/ 0.8433219
Hey Ed Forsythe!!!30 Jul 2007 05:46 GMT7
I just came back from visiting the XPS site. It cost me almost $500, but I
feel better now not having to worry about 2.4 GHz problems.
I bought two combo packs and some accessories. The combo packs are for my JR
radios.
BWB X-48B model flies...what turbines is NASA using on this model?29 Jul 2007 16:18 GMT1
turbines here:
http://www.dfrc.nasa.gov/Gallery/Photo/X-48B/Medium/ED06-0198-37.jpg
article here:
http://www.nasa.gov/home/hqnews/2007/jul/HQ_07165_BWB_First_Flight.html
New Pilot Update-ParkZone Spitfire29 Jul 2007 15:09 GMT6
The Spit is still hanging safely on my wall, and I've been flying the Super
Cub.  Actually the Super Cub almost flys itself!  I've got 70 minutes flight
time on it, and haven't crashed hard yet.  I broke a plastic wing strut and
cracked the cowl on my first "landing", but no other ...
RCU editing and deleting posts28 Jul 2007 05:29 GMT16
Don't you just love it when a moderator's posts are completely unhelpful on
the question asked.  Then he argues word choice with the one person who
actually posts useful information.  Then he gets rude.  Then he deletes your
post when you call him on it and he goes back to change ...
Giant scale P47-D Thunderbolt kit28 Jul 2007 01:47 GMT3
eBay: http://easyurl.net/P47D_kit
UpStar EP Glider by Tower Hobbies27 Jul 2007 13:33 GMT5
Has anyone tried the UpStar EP Glider by Tower Hobbies?
Would you care to give your personal opinion.
Likes and Dislikes! Good and Bad features!
Earl of Ohio
Don't lose your plane!27 Jul 2007 04:08 GMT7
I lost my second plane in the weeds this year. Last year I last a Zagi -
never found it.
This year a 2 meter EP glider. I told myself that I needed to put a plane
finder alarm in it but failed to do it in my haste to get it in the air. If
Lithium Polymer batteries discharged to very low level with NO load.26 Jul 2007 21:15 GMT4
I recently experienced a problem with a set of LiPos whereby the
batteries became discharged to a very low level (one to 3.4V and one
to 0.1V). I was in a rush when leaving for the weekend and simply
removed the batteries from my vehicle by disconnecting the Discharge
Litco Current phone number?26 Jul 2007 20:07 GMT2
Has anyone bought an Alpha4 in the last couple of years?  If so,
please look in your manual for the current phone number, should be under
Service and Warranty Policy.  My manual is so old it shows their NJ
number and address.
Pages: 1 2 3 4 5 6 June, 2007
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.