Model Forum / Radio Controlled / Air Models / August 2007

Anyone ever built one? Know of plans, kits? Looking for data on it.
Thanks, Ted.

I was looking through supplies for "real" aircraft and found
clear dope for $29.30 a gallon.  That certainly beats over
$5 for 3.5 oz at the LHS.   I remember going to a local
airport as a kid to buy dope by the gallon.  We used to add

just built up and ARF eindecker (hobby-lobby).
i was just doing some taxi-test in the street and the thing just wants
to ground-loop no matter what.
i bring up the power slowly, and it loops hard.

I have acquired this great kit, but it lacks the 32 page instruction manual.
Does anyone happen to have one they could copy and send to me. Naturally I
will pay for copy and mailing expense.

I am thinking of buying one of these radios. I'm only going to use it on a
trainer and and a Zagi for now. I'm getting a Somethin' Extra a little
later.
I was wondering what peoples opinions were on this radio. Also I am able to

anyone can tell me where can I FIND jet cleaning company?

HI i just bought a jr R700 rx and when I checked it by connecting it t
a 4.8v battery pack and then connecting it to the servos on my heli i
glitched like crazy. I am new to rc and want to know if this is norma
or do I have a faulty rx.

The spray bar for the low speed needle valve on the carbs used on the
ST 60, (1970s version)
This Spraybar is a  brass tube externally threaded on the outside for
the low speed needle valve, and threads into the carb rotating

It's incredible sometimes to see what today's young people are
capable of doing.
Imagine a self charging solar battery that is also the covering of
your plane. Shouldn't be long now.

I want the 2 elevator servos on my model to operate in opposite directions
using a Y lead.
Is it just a matter of reversing the + and - wires on one side of the Y
lead, or is it more than that?

Chinese antique, wonderful treasure big collection invitation visit
Antique 1912-1949 Porcelain teapot 528 chinaware 400 ，Website extreme
security invitation visit，
Thanks ！

Would it do batteries any harm to stick them in the freezer for a while
before soldering the tags on to lessen the chance of overheating during
the soldering operation? I need to make up a couple of 2700 Mah 7.2v
sticks to fit into narrow glider fuselages and can buy the cells but

Antique 1912-1949 Porcelain teapot 528 chinaware 400 Website
invitation visit
http://www.xjx588.com
http://www.xjx588.com/more.asp?name=xjx588&id=14

I really think I've got the hang of this! One would hope, anyway,
since my plane is essentially a slow-stick powered glider. Still, it's
great to be able to get aloft on the first attempt, and today I got two
flights of over 5 minutes each, by soaring in the breeze aloft for up ...

Had my PJS-1000 electric motor develop a knock, just like a gas engine, now
that really got everybodies attention! :)  Got so hot it locked up and
couldn't put a finger on it.
Pulled it apart and found the rear bearing bad.  A flying buddy told me he'd