Model Forum / Radio Controlled / Air Models / September 2007

I lost my charger for a digital camera.  The battery is a 3.6V LI-ION 650
mA.  I have my trusted Triton, and that can charge most anything.  But the
question is this:  on the battery and the charger, there is a third
connector. Its between the "+" and "-" pole and is labeled "T". ...

I'm preparing to build a Douglas Dolphin amphibian, but can't find any
narrow 3" diameter tires for it.  Wheels are no problem, since I've got
a lathe, but tires are another matter.  I've looked at Sullivan, DuBro
and BVM, but none appear narrow enough.  They need to be about ...

What type of glue is this?
david

I just bought a used Tracker that unfortunately did not come with
directions.  Anybody know where
I can get a copy?
Thanks,

I desperately need 3 Futaba servos with old style square drive shafts.
(about 5mm across flats)Can anyone point me in the direction of where
I might find these? The target model number is S121 but if you have or
know of, any Futaba servos with square 5mm shaft please contact me.

Hi I want to get some servos for a STK superframe. I have heard tha
this frame was specifically designed for hs56 servos but I want to us
hs65. I know the offsets for these servos are very different. Henc
could some one please tell me what are the measurments from th

Speaking of landing gear, I was going to take off from a road
yesterday with my Commander 2. The problem was that the plane kept
making a hard right turn under power, even though that brought it
slightly 'uphill' and over the crest of the road. The blasted thing went

Can anyone tell me if I can use the JR. standard servos with a VG 6000
Aitronics Transmitter/receiver?

Anyone know where I can obtain either a kit or a pre-built plane (still in
reasonable condition)
Thanks in advance
Lenny

Just wondering if anyone here has been scammed by Thomas (Dell) Shannon?
He took payments from several people off of Ebay and never sent items.
He's in Iowa.
Federal Mail Fraud charges are being filed against him by several people and

I had a little accident with the .40 Ultra Stick during take off and
snap-rolled it about four feet above the ground. Shattered much of the front
end, but it is repairable. Here's the question: the landing gear was torn
off. Actually the hardwood piece the aluminum landing gear ...

I am using this giant servo to rotate an electric prop to steer a
video barge.
The servo must rotate 180* to reverse the prop.
In order to extend the angle of rotation, the web says that one should

Hi what equipment do you recommend i.e. measuring equipment, tacho's
watt meters ETC.
I have balancers and 5 cell LiPo chargers as I started with park flyers
and am now looking converting some 40 glow powered aircraft

I've bot a Bird of Time ARF that was crashed that I want to repair.
The nose was smashed up nicely, and there's some cracks in the
fuselage.  Pictures at
  http://mclarenhome.com/~dougmc/RC/bot-repair/

http://www.groningeninternettop25.nl/opslaanstem25.php?IndexNr=565&&Naam=Modelvl
iegclub
F.