Model Forum / Radio Controlled / Air Models / April 2008

Please if any have orginal plans for fun 51 3d plane ?
i need picture of plan with measurement. i receive wing and tail (gift), but
fuselage is missing.
thanks in advance

Hi...I built rubber band flyers as a boy, but now I'm 81 and I want to
try my hand at building AND flying again, but electric this time!
Emphatically, I do NOT want an ARF!!
After searching for appealing designs, what looks great to me are the

Hi, All,
  Got the wing joined today, glad I had a lot of room in the
garage!!!  Used a 1/2 inch plywood center rib between the balsa ribs
to create a "probe" to lock the leading edge to the fuze.  I'll put

3 months ago I picked up several LIPO packs (11.1 volt, 2200
mah, 20 C) on the cheap.  When I went to charge them, one
charged up fine, but with the other two, my Triton Jr.
charger gave the error message, "Battery Voltage Too Low".

Just a quick note to let folks know about the web site my son built
get the word out about cutting your own foam wings.
www.foamwingcutting.com

Just bought a charger for lead acid and gel batteries from Lidl
selectable 2/6/12v
max current 600mA
reverse polarity alarm

Hello everyone.  I really enjoy reading this group and have learned alot from your posts.  I have a question, I have a Micro Peak Technology Super Brain 959 charger.  Does anyone know if there is a Dean's plug adapter to charge Great Planes ElectriFly 8.4V 3000mAh 7-Cell Stick ...

DoeS aNyBody know of a good material for building boards, available in the
UK? I'm mainly struggling with a cork-like top to stick pins in. I tried to
get cork at Homebase or B&Q or somesuch place, but they didn't have it and
pointed me to Tesco which did have some noticeboards but ...

Just purchased the senior telemaster from hobby-Lobby, as my cas is
bit smallish I would like to convert the wing into a 2 piece one, at th
same time get rid of the rubber bands and convert to bolds aswell.
Thanks a lot for any help

I have just discovered these models, which look ideal park fliers.
Where is the best place in UK to get them?
I would want something about three foot span weighing about twenty
ounces to be safe on the local playing field.

I've just been offered the WC1, and was wondering if someone here could
point out the main differences between the WCII and older original 9ZAP
Thanks in advance
Gerry

I just acquired an E-flight EFLM108 brushed motor with 4:1 planetary
gearbox that has a reccomendation of a 11x8 prop.  It's speced for 7-8
cells of nicad.  I'm wanting to run 3-cell lipoly (11.1v).  I'm not
too concerned about the voltage but I can't find any spec that says

If you got a 91 4 stroke  in good condition that you want to sell
please let me know, I 'm buying if the price is right.
email me at tetsuyo@japan.com
thanks