Model Forum / Radio Controlled / Air Models / May 2009

I mixed my first batch of fuel yesterday, very easy and works great so far.
I purchased Klotz synthetic and racing castor from Tower Hobbies.  Found
some methanol locally from someone that supplies fuel to local race tracks.
I calculated how much methanol I needed to add to a ...

Anyone know if the Russian K-7 SuperFortress was real (photos)
I have kept track of most aircraft that have ever been built then
yesterday I ran across this ?
I find it hard to believe it ever existed especially back in 1930

Just got done overcoming all the problems with materials and engineering
on my Top Flight Nobler, and started sanding it to profile -- backwards.  
I nicely rounded off the hinge line, instead of the leading edge.
Bad Dobby.  Bad, bad Dobby.

PLEASE STOP ADVERTISING HERE

I'm learning to fly a Global Right Flyer 60.   When I started, we put my
plane on my brother's frequency and used his Hitec Flash 5X as master, with
my Futaba 6XAS as student. I have the Hitec 'one way' trainer cord.
Due to scheduling conflicts last time we flew, my brother needed ...

Any one know where to buy a Winsock for an rc field. Don't want a full size
one

Can anyone tell me what is the active chemical in "kicker" type products that
speed superglue bonding?  Thanks in advance.

I hope the AMA is better at fighting the TSA than the AOPA is.
http://wcbstv.com/local/model.airplanes.radio.2.244416.html

List Price:$89.99
Image: http://bestdeallocator.info/image.php?id=B000N20MTE
Best price found: http://bestdeallocator.info/index.php?id=B000N20MTE
I had no idea how dirty my carpet was. I had been using my old Eureka Power Plus and it just wasn't doing the job. I got this for ...

Anyone have one these kits (not started) to sell?

AAAAAGHGHGHGHGHGHGHGHGHHHHHHHH!
Thanks for letting me get that off my chest.  I feel so much better now.
(now I just need to reengineer the horizontal stab, and find some decent
wood to build it with...)

Looking to build a foam cutter to cut a few wing cores.
Have looked on the web and find cutters that are bows. Is there a better way
than these?? Is the a cutter that is auto-matic?? one that is cheap that can
be pluged into a cad program to cut things??

I am almost afraid to post this following the beating I took when I
last posted here.   But here goes... my son has put an 8 minute
segment of the 2 hour video tape on cutting foam wings by hand out on
youtube.   Before you ask, yes it still links to his website that

Is the denatured alcohol sold at hardware stores the same stuff you would
use to blend your own fuel?  I'm wondering because I have some 30% heli fuel
with high oil content that I'd like to cut to maybe 15% to 20% with a lower
oil content for model cars.