| Thread | Last Post | Replies |
|
| Building board- what material? | 08 Feb 2010 22:41 GMT | 6 |
Does anyone have a recommendation of what type of material would be
good for a building board? I have an old flat door as a base, but it
is very hard to push pins in.
Thanks!
|
| 27 mhz receivers wanted | 08 Feb 2010 16:36 GMT | 11 |
Anybody out there that might have any 4 channel or more 27 Mhz AM
receivers such as Futaba, Airtronics or even JR? They don't make them
any more... so if you have one in your junk box, and will let it go..
please contact me....Thanks
|
| Nitro Planes ?????? | 08 Feb 2010 03:22 GMT | 4 |
Has anyone ever sucessfully ordered anything from this company? I have
been trying to order either a P-82 or a Predator for over six months
and all I ever see is "out of stock". I have written them and asked to
back order but am always told to check back in 2 weeks. These guys
|
| T-34 first flight....sorta | 06 Feb 2010 02:52 GMT | 1 |
OK, so it was only 2-3 seconds while doing a taxi test in
the company parking lot. Had to see if the nose wheel
was straight.
Sorry for the rain this weekend in SoCal. My fault. I bought
|
| flap & aileron settings DX6i | 04 Feb 2010 04:41 GMT | 3 |
I'm putting together an e-Flite T-34 ARF and am not sure how I
should set up the aileron and flap servos. This bird has two
aileron servos and one flap servo.
Should I put the 2nd aileron on the aux channel and the flaps
|
| Plane for live video FPV RC? | 01 Feb 2010 01:29 GMT | 4 |
Many recommend the Multiplex Easystar for FPV (First Person View) R/C
systems. It looks capable but the standard equipment is a brushed motor,
speed control, and NimH battery pack. So, it ought to be even more capable
converted to LiPo, and a brushless motor & speed control. ...
|
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage
Start New Thread