Model Forum / Radio Controlled / Helicopters / August 2003

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3142864952&ssPageName=A
DME:B:LC:UK:1
Sorry had to put this in as I made a mistake on the first post.
post within the uk

Ok here is the deal. Last week I went to my local hobby store to purchase a
Raptor 60V2 and he was out of stock. I then bought one online and when I
returned to the store for extra parts I was told that the raptor 60 is being
discontinued! I was livid for one so I came home using a ...

Hi all, I have just bought my first helicopter its only a cheapie from e.bay
a sky vector, trouble is it flew to start off with , but within an hour of
the kids flying it , it now doesnt take off , its doesnt seem to have enough
power , any ideas :)

Hi all, out at the field today with a fellow heli hopper,he's got a nice
bright shiny Calibre 30.He mentioned that one of the rods, connecting the
pitch servo to the swashplate , had got bent and he didn't know how.He put
it down to having knocked it or something.Anyway, he took it ...

  I recently damaged the blade coverings on my stock wood blade of my
shuttle challenge.
my options are to buy blade coverings and balancer
or

Someone who have an advise how I can charg my PCM 10X with my schulze
charger, ISL6-430? After about 10-20 second the battery is full, and the
charger have fulled it up with 1 mah, NOT enough! It is also like this if I
take the battery out of the radio.

What would be the best upgrades to do to a stock machine? Any one thing
better than another?
I'm just wondering because I pranged it a bit the other day and when I have
it apart and am getting parts for it I figure I may as well put in the best

Need a good Tacho meter for my helicopters.
Want to fine tune my Governor's
What brand, where do I by it etc`?
Christer.

I wanted to run CSM10 on my Athlon 2Ghz and windows XP but it doesn't seem
to recognize the Parallel port (I checked the port and the IRQ but nothing
helped)
do you now is there is a special thing to do (compatibility mode?) to make

I have a JR Venture 30 with a webra 35. the problem I am having is I am
having to run the engine with the high needle valve almost completely closed
(lean) to get it to run right. I am using 15% cool power and a OS 8 plug. I
havent tried to trouble shoot yet just trying to get a ...

Anyone know where parts may be available Tks.

I actually managed to get some flying on tape today.  Unfortunately, I
crashed :-(
This was my Rap30 V1 with V2 head, Irvine 39H.  The engine seems to be
bogging a lot more than it used to so I think it might be time for a new

        Recently bought a Nexxus .32  used       a little while down the
road the cooling fan over the engine  broke
So i bought another one  in Aluminum   but i guess the clutch just goes in
to one another  but now when i crank the engine   first it dosent start

Aussie RC Heli Pilots *might* want to check out a new site catering
for the RC Heli enthusiast in Australia.  Calendar, gallery, news and
events, discussion forums.  Not to detract from NGs or other BBs -
just a central browser-based online resource for the Aussie community.

We Brits are REALLY suffering at the moment. It's Summer when it normally
pisses it down but its HOT!!! 30 + degrees C today in normally wet and windy
Manchester, and it's been this way for the last week. The worst news is that
its going to stay this way for most of August........I ...