Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / Radio Controlled / Helicopters / August 2003



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
opinions on blade balancers09 Aug 2003 02:05 GMT4
I was looking for a blade balancer ... someone recommended the Hi-Point
ones but I can't seem to find a reseller for them over the net.
Heliproz recommended the KSJ balancer just want to bounce it off everyone
here
LiPolys for an Eco 8 Electric Helicopter??08 Aug 2003 18:44 GMT1
Anyone any advice on what to buy and where to buy Lithium Poly battery packs
in the UK????
Could do with someone who talks through there mouth rather than any other
body orifice for advice.
O.S. 70  Are they easy to adjust?08 Aug 2003 09:43 GMT1
Im moving up to 60's and i would like to ask if the 3 needles are low,mid and
high settings on the throttle stick? Is the motor easy to tune?
Thanks, Michael
Helicopter simulator08 Aug 2003 08:54 GMT8
Have any of you experiences with the simulator CSM
(http://www.rcmodels.org/csm/)? I don't care about fancy graphics - what I
do care about is "close to real life simulation".
What would you recommend?
Please Help with 35MHz Dragonfly and 36MHz Transmitter07 Aug 2003 09:28 GMT4
I have recently purchased a Dragonfly without transmitter. The Dragonfly
does use PCM...
The guy supplied me with a 35.180MHz TX crystal to match the one on the (all
singing and dancing) receiver/controller board.
Beav has this for his Sunday 'meal'07 Aug 2003 05:08 GMT6
Lady Login's Receipt, 1856
       1 cleaned sheep or lamb's stomach bag
       2 lb. dry oatmeal
       1 lb chopped mutton suet
X Cell 60 ???06 Aug 2003 22:28 GMT5
Some years ago I flew Concepts etc but then gave it a rest for a few years.
Just got back into helis with an ECO 8 electric heli.
I can fly the blades off it now and am starting to consider something wilder
and certainly more powerful.
Trying to find Best price on Eolo06 Aug 2003 12:19 GMT2
I want to buy a Robbe Eolo and I am trying to find the lowest price.  I live
in Florida so I would like a vendor in the U.S. or maybe someplace that does
international orders.  The goal is to save as much $$$ as possible.
Why do the top fliers...05 Aug 2003 17:56 GMT7
dump their helis when they land?
When I land I fly to about a foot, hover, then gently, oh so gently, lower
the machine to the deck before chopping the collective and power.  yet when
I see video of the top fl;iers they fly to their feet and keep on going,
Nexus 30 - clean  fuel tank ?04 Aug 2003 20:41 GMT2
I did an arsehole thing , and left about a CM of fuel in my tank for about
two weeks, and now its made an ugly water line residue.
Any suggestions on how to clean the tank , without stripping the heli ?
TIA
Realflight G2.04 Aug 2003 20:12 GMT2
Realflight G2 with Add ons volume 2 for sale Interface parrallel type for
sale boxed with manual.
£60 plus postage.
If interested leave me a message.
Head Speed?02 Aug 2003 22:45 GMT4
What is a decent way to adjust head speed without a tachometer?  Wondering
if my head speed is a bit on the steep side.
Signature

Biggie in PA

OS 32 - Ring or ABC ?02 Aug 2003 13:42 GMT6
Okay I've finally decided to upgrade to an OS 32 SX-H.
Question is ring or ABC ?
Although, I'm new to helis I have over 15 years of running model engines so
please rule out the "ring because it's more tolerant of beginner's mistakes"
YS91ST01 Aug 2003 19:39 GMT8
Just bought a YS91ST to run in my Vigor.
Anyone using a combo like this ? Any tips regards setup  if the answer is
yes ?
Just waiting for shop to get my muscel pipe II in and some 710 blades and
TT39 spares01 Aug 2003 12:58 GMT1
Gents
Who carries spare parts or services Thunder Tiger Heli engines in the UK?
Mike
Pages: 1 2 3 4 5 July, 2003
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.