Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / Radio Controlled / Helicopters / November 2003



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
newbie questions18 Nov 2003 21:45 GMT9
1. What is the purpose of idle up on my transmitter?  I turn it on when I
fly so that when I bring the throttle down to lose some altitude, I don't
lose headspeed.  Is that what it is for?
2.In forward flight, my tail swings around, but does not do that during
carbon pushrod18 Nov 2003 18:54 GMT2
i remember seeing on one of the web sites a c/f pushrod kits for a raptor
60, but this one had an alloy fin carrier with a guide for the pushrod to
run in any one help me with the site ?
Barry
Newbie - Raptor V218 Nov 2003 14:57 GMT4
Building my first Heli... Raptor V2
Just a few questions I'd like to ask if its OK.
1. Do I need a Gyro Amplifier??
   (I have a CSM HLG200 Heading Lock Gyro)
Webra 75AAR pipe?18 Nov 2003 05:22 GMT3
Hi Guy's
Just wondering what the reccomendations are for tuned pipes to be used on
the Webra 75 AAR. I have one in my Venture 60 with a Muscle pipe 2.
Unfortunately I can't get any decent power out of it, either I am not tuning
Robbe "WinCharge" software18 Nov 2003 05:05 GMT2
Does anyone know if there is a trial version of this software available?
How do I fit the training undercarriage18 Nov 2003 04:33 GMT10
Hi
I have bought the Carbon training undercarriage shown on this page.
http://www.modelhelicopters.co.uk/acatalog/online_shopping_Helicopter_Spares_22.html
(model A-R3836 : Carbon Training Undercarriage)
Ripmax email address?  Or Electronics?17 Nov 2003 23:10 GMT3
Has anyone got an email address for Ripmax?
Or how good is your electronics?  My power panel is now giving 12v at the
glow plug!  What size resistor do I need to bring it down to 1.5v?  The
current one must have died! And I can't get to it to see what size it is.
FF9 Vs PCM9X17 Nov 2003 14:09 GMT6
Anyone got any preferences or comparisons yet?  Or is it still a case of
personal choice (as I suspect it is!!).
Having seen and held both, but only used the FF9, I was very impressed with
the JR version...such a nice feel to the tx.  Going to buy one or other from
Master class16 Nov 2003 21:23 GMT18
Guys/ gals,
If a well known display / training pilot was to put on a heli aerobatics
masterclass / seminar, would you attend and what would you want to do?
I'd go and I'd want to really get some techniques for making my aeros much
Raptor 6016 Nov 2003 17:01 GMT3
           just got my self a s/h raptor 60 but no manual does any one know
where i can download one from ?
Barry
FF8 ups problem???????16 Nov 2003 00:10 GMT5
i have a ff8 tranny wich doesnt transmit properly
it seems to loose contact with any model after 10-20 feet
maybe ariel gubbings related
can anyone advise or help me
Great prices at Cyber heli at the mo!15 Nov 2003 19:05 GMT1
Courtesy the falling dollar the price of a FF9 from CH is now around the 200
quid mark!  Can't last!!
Thinks...should I upgrade my own FF8 to a FF9 whilst the Merkin peso is low
or not?  Will it improve my flying and enjoyment?  Hmm.
O.S Engine15 Nov 2003 17:25 GMT1
Can someone please tell me the address of the UK main distributor for OS
engines, and do they do repairs?
Regards
P.H.
Attempting to learn Chaos15 Nov 2003 12:09 GMT2
Could anyone give me a description of the control inputs for Chaos?
I am practising on Realflight, just as well as I am ok for 3-4 revolutions
then loose it & pummel into the ground time & time again!
On the cyclic I'm moving around in a circle which seems to work but I don't
Overflying15 Nov 2003 10:48 GMT10
Evening all
Here's one for all you wannaby lawyers!
Would you consider a landowner has a right to claim trespass if you overfly
his land WITHOUT prior consent?
Pages: 1 2 3 4 5 6 7 8 October, 2003
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.