| Thread | Last Post | Replies |
|
| Charger | 19 Dec 2003 00:37 GMT | 2 |
Just wondering what kind of charger I need. Have a 12V gel battery in the fieldbox, and I am thinking of buying a 1700mah for my raptor. Can I use the charger in the radiokit (Futaba 9C)to charge the 1700mah
|
| Balancing the magnet on governor | 18 Dec 2003 23:41 GMT | 3 |
Just about to start thinking about fitting my throttle jock to the Sceadu 50. Question...how does one balance the magnet's weight on the fan...or is it so light and so close at 28mm that it's not importnat? David
|
| FAQ Request | 18 Dec 2003 21:12 GMT | 3 |
Where is the FAQ for this list? I'd like to check it before I post any questions that may have already been covered. Thanks Xrxs
|
| model helicopter world | 18 Dec 2003 14:06 GMT | 1 |
could someone please supply me with the email address for the readers forum in this magazine thanx SAID
|
| Hornet Rotor Head | 17 Dec 2003 19:59 GMT | 1 |
I am building a Hornet Collective pitch version, and am puzzled as what holds the 3 damping O-rings in place? I was thinking of using a few drops of cyano. Does anyone have any experience of them falling out?
|
| R30 engine bolts and washers. | 17 Dec 2003 16:44 GMT | 2 |
I lost a couple of engine mount screws and washers and was wondering if anybody knew of some place to buy these from? M3x14 socket screws (HMC3-14B) "Flat washers" BK0087
|
| uk model stores accepting paypal | 17 Dec 2003 06:25 GMT | 7 |
Does anyone know of any stores in the uk accepting paypal payment ? Cheers Zak
|
| Help with Kyosho Concept | 16 Dec 2003 20:13 GMT | 2 |
I just got ahold of a used Concept 30 DX. It's in pretty good shape but came with no instruction manuals or anything. If anyone has a set they want to get rid of or know where I could find them online any help would be appreciated. What I need more then anything is
|
| Gyro holding | 16 Dec 2003 18:45 GMT | 5 |
When flying fast backwards the csm 420 seems to have a job holding, it works great flying normally, but when you need it going in reverse it lets me down, should I have gone for the 560 so I could tinker with the parameters? Any suggestions to correct it?
|
| Electric Mini Reco | 16 Dec 2003 01:42 GMT | 1 |
I have been flying R/C planes for years, and my better half recently caught me looking at a Piccolo in the hobby shop, I was like, not bad; everything for $260 including radio etc. Well now x-mas is around the corner and she would rather get me that then my cigar humidor. Anyhow, ...
|
| autorotation question | 15 Dec 2003 20:21 GMT | 3 |
Even though I'm on only my 4'th gallon of fuel in my Caliber 30, I'm playing around with autorotation. Here is my question. When I had my training gear on (2 36 inch dowel rods with 4 pretty light wiffle balls), when I went into throttle hold at several feet above the ground, the ...
|
| Hitec Eclipse good for 3D ? | 15 Dec 2003 20:11 GMT | 1 |
|
| new user | 15 Dec 2003 16:42 GMT | 5 |
Can someone tell me where to start to look for a RC helicopter for a new hobby? What are decent brands? What to look for? Thanks for any ideas. : )
|
| Here's a bit of a laff. | 15 Dec 2003 14:08 GMT | 5 |
Just received a servo thru the post from a guy on eBay. Used 3 times he said, excellent condition...even got a photo of it on the ebay page. Anyway, it comes today...all muddy and one of the mounting lugs broken off...not exactly what I was expecting to say the least. Not really ...
|
| Micro heli recommendations??? | 15 Dec 2003 14:02 GMT | 2 |
I'm been thinking of getting a micro heli as my first heli (I've done mostly hand launch gliders, battlebots, car, boats, hot air balloons...) and was wondering is people had any suggestions among the Piccolo, Hornet and Hummingbird. The Piccolo seems to have the
|