Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / Radio Controlled / Helicopters / December 2003



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Need adjustment help11 Dec 2003 16:27 GMT1
I took my Shuttle into forward flight for the first time yesterday and I was
wondering why the tail started swinging around.  Does the gyro need to be
more or less sensitive?  I think I have my rev. mixing set up okay.  During
hover I can give it full throttle suddenly and it rises ...
stabilised heading11 Dec 2003 15:29 GMT2
Dear,
I hope my english is good enought to understand my question.
It is just a theoretic question.
How long does it take a super gyro controlled heli rotates around 90 degree?
will be engine be fried ?10 Dec 2003 08:08 GMT4
muffler bolt sheared today then muffler took off the throttle link ,
got my R30/Irvine39 down from about 50ft and held it down on -ve at
pretty much full throttle till the plug popped.
had to run about 150ml 15% WC thro it , it was not too hot after it
hummingbird10 Dec 2003 06:22 GMT2
hey, my hummingbird equivilent helo doesnt take off straight (tilts to the
right and goes forward) how do I adjust this?
GV 1 problem09 Dec 2003 23:54 GMT2
I just recently bought a gv1 and finally got it working properly, but
now it will not display my max rpm.
is there some setting that may affect this feature or is it broken ?
Greg
Today09 Dec 2003 12:11 GMT9
Awesome!!! Weather fantastic, cold, light breeze and SUNNY!
The X-Cell 46 Graphite powered by the Webra 52 AAR is SO powerful! It's been
a bugger to set up, and is still difficult to start, but when it goes it
GOES!!!! Press the loud stick forward and it becomes a dot!
FA on Ebay-Vintage Dubro Whirlybird 505 Heli Kit08 Dec 2003 23:56 GMT4
Thanks for looking. Listed in true auction fashion,
strarting at a buck with no reserve. If the link wraps, just do a
seller search for
badbill  .
Controller question (anyone)08 Dec 2003 22:35 GMT31
On my electric aero-hawk helicopter. Whats with the little slide button
controls beside the controller sticks? Actually they are under them and
beside them. Are they crucial for flight? The manual dont have nothing
about them! The manual also has my controller reversed. It says that ...
Flybar weights08 Dec 2003 16:33 GMT3
Can anyone tell me the theory behind the weights on a fly bar? The further
out you have them makes the model do what......?
Regards
P.H.
Rap 90's first tank07 Dec 2003 09:34 GMT1
Took a brand spanking new Raptor 90 STD into the hover yesterday for the
first time. Brilliant:-))), and what a power compared to the Rap 30:-))
Mike
Inverurie Flying Club
Blackhawk - PRE-Flight RC Sim New Helicopter07 Dec 2003 08:56 GMT1
The UH-60 Blackhawk  Helicopter comes highly detailed - with full
rotor animation and smoke effects. Fully aerobatic and 3D capable with
selectable gyro (HH and non-HH).
Download free at :
Paint/Spray Body06 Dec 2003 20:19 GMT2
Hi i have a Raptor 30 v2 i dont like the transfers for the body so i want to
Paint/Spray the body can some one please tell me what type of paint or spray
to use that is ok for this many thanks Steve.
Help with spares06 Dec 2003 13:02 GMT2
   Just wondering if anyone knows where I could get the entire
screw/nut/bolt set for a Shuttle S-TS from. Preferably all in one go.
Thanks in advance
Andy
CCPM vs "normal"06 Dec 2003 12:30 GMT4
I've noticed CCPM conversions on the internet and am wondering whether there
is any benefit to be had over a non-CCPM set-up?
Comments?
(Part of the reason for asking is that I am putting my Raptor into a scale
homemade heli's05 Dec 2003 21:45 GMT2
Hiya,
I would like to build my own helicopter, I dont know how feasible this is,
I was thinking of using something like a strimmer engine, as there small air
cooled units, I was just woundering if anyone knew of any websites where
Pages: 1 2 3 4 5 6 7 November, 2003
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.