Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / Radio Controlled / Helicopters / December 2003



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Screensaver for PRE-Flight RC Simulator05 Dec 2003 08:28 GMT2
The Official PRE-Flight Screensaver features the same high-quality,
DirectX 3D graphics as PRE-Flight. Fully customizable. You are the
director and the cameraman, as well as the pilot. Create your own 3D
flying videos. Includes instructions for installation and how-to for
??How to increase thrust??04 Dec 2003 10:56 GMT2
I need to increase the amount of thrust I am getting from my
propeller.  I am limited in the fact that I do not want to change my
propeller or gear ratio.  So to my best knowledge, I have the
following options:
Off Topic - Car Battery Charging04 Dec 2003 08:00 GMT5
Sorry Guy's - I know this is off topic, but having participated in this
group for a fair amount of time, I'm sure that you guy's are the best
suited to offer advice on this off topic query.
I have a car (Elan M100 - not remote controlled) that stays in storage for
Servo formula04 Dec 2003 02:52 GMT4
Does anyony have a formula to convert servo Kg/cm torque to oz/in
TIA  Arn
Sky Pioneer?03 Dec 2003 01:02 GMT6
Anyone know if that $50 Sky Pioneer helicopter is a joke?
Optical Sensor / Futaba GV-102 Dec 2003 21:05 GMT2
I have seen the details in U.K. Heli mags regarding fitting an Optical
sensor to the Futaba GV-1. I intend fitting an optical sensor I have
obtained to a Graupner Heim Uni Star 90, by fitting it to the cooling
shroud. What I would like to know if any of you guys are able is, can I
Daft question?02 Dec 2003 18:17 GMT5
I am a lapsed fixed winger and am looking to try out on helis.  Now this may
be a daft question, but do I need to buy a new heli radio? I have several
sets of 4/5 channel stuff and loads of servos etc.
On the other hand...02 Dec 2003 18:05 GMT3
THIS is what you really, really want.
http://www.firebox.com/index.html?dir=firebox&action=product&pid=415
D
need info02 Dec 2003 17:51 GMT7
What are some good heli websites
Electric helicopter02 Dec 2003 07:14 GMT1
Can someone suggest a good choice of electric helicopter and perhaps
the best place to purchase in the uk. The reason I am thinking
electric is because I do know somewhere where I can fly it indoors in
a largeish space.
CSM 540 Gryo01 Dec 2003 21:48 GMT3
can any help me ! I have lost my pc interface software floppy disk  can any
body email me a copy of it please ?
Barry
Video - Flying My Rap50 yesterday01 Dec 2003 21:44 GMT8
I managed to get some footage of me flying my 50 yesterday at my flying
club.  Thanks to Mark for the camera work.  The heli gods were on my side -
no crashes this time :-))
http://www.runryder.com/gallery/05912/Rappy_ChappyRap50.zip
which servo?01 Dec 2003 14:56 GMT3
I currently have Futaba 9001s on my Sceadu, with a 9252 on the tail.  I have
just acquired a 9304 and a 9002.  Which (if either) would be better suited
to the collective function in place of the 9001?
Its a daft question probably, but I have not got a spec card for them!
Heli Raptor Hovering01 Dec 2003 02:53 GMT13
Havin had my Raptor now for a week..
I removed the training gear first time last night.
Did quite well hovering around for a good half an hour
all in all.
District Council01 Dec 2003 02:13 GMT8
Dear Group, I have today been served with a letter from Stroud District
Council warning me of the 'Environmental Protection Act, 1990' Code of
practice on noise from Model Aircraft 1982,
They seem to have me banged to rights on Article 64 section 7.3, of the Air
Pages: 1 2 3 4 5 6 7 November, 2003
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.