| Thread | Last Post | Replies |
|
| Mufflers | 17 May 2004 21:48 GMT | 1 |
Having bought Raptor V2 without engine,I was wonderin if me OS32 muffler from me concept would fit meOS32sxh in the Rappy.. Ta
|
| Newbie > which heli..Kyosho Caliber or Raptor | 17 May 2004 21:25 GMT | 7 |
Any suggestions greatly appreciated.
|
| Lack of power. | 17 May 2004 21:21 GMT | 15 |
Hello. Anyone know what would cause my heli to remain grounded even though i am giving it full throttle/collective? I did suspect the clutch lining to be worn, but i have only had about 2 hours worth of hovering time since i bought it new so that leaves me in doubt. I stripped the ...
|
| Please help! Transmitter is back to front | 17 May 2004 18:23 GMT | 3 |
Hi. I just installed FSM on my computer and linked up my Zhen Hau PCM 4CH transmitter. The simulator programme recognizes the transmitter but the throttle control on the simulator is on the right instead of the left where it ought to be, and is, when I fly my electric
|
| A New Modelling Forum | 16 May 2004 19:47 GMT | 1 |
Folks, I have just launched a new modelling forum and you are invited to take a closer look. Unlike other forums this one is going to be different! One of the
|
| Chinook controls | 16 May 2004 18:50 GMT | 24 |
Been searching for a site that sheds light on exactly how the chinook chopper is controlled vis a vis pitch mixing to acheive controlled flight. I cant. Anyone help me? David
|
| Schuttle ZXX - still ok? Plus a muffler question. | 16 May 2004 10:54 GMT | 3 |
Over five years ago, I tried to start the rc helicopter hobby. I bought a shuttle ZXX, carefully put it together, and then never got around to actually flying it... I would like to have another go at it now and I was wondering if the
|
| Sceadu Evo 30 setup question | 16 May 2004 09:30 GMT | 16 |
Got the above last weekend and had a test flight. I found that it was very sluggish on the cyclics. I have left both weights in the paddles and have the seesaw on the 'auto-stability' setting, also 20% expo on the cyclics. What would you suggest I change or play with to get it ...
|
| mufflers\silencers? | 15 May 2004 19:09 GMT | 4 |
I'm looking for a decent muffler/silencer. Can anyone tell me which is the best to go for on a size .46 powered heli? also, is there different sizes of skids on the market? I find that the ones on the nexus are a bit too short and of poor quality.
|
| Batteries | 14 May 2004 21:29 GMT | 26 |
I was wondering having just purchased some nimh batteries why I cant find anyone who supplies a charger to plug straight into the transmitter and runs from a normal household electrical socket. Can anyone help
|
| JR radio - PCM9x or 3810? | 14 May 2004 06:36 GMT | 2 |
Which is best? General sport flying, not much difference in price.
|
| Free R/C Gear | 14 May 2004 00:09 GMT | 5 |
If you live in or near the Modesto, California area I have some free R/C stuff I am giving away but you must pick it up in person. I have a Kraft Electric Chipmunk that was crashed but can be repaired or used for parts, a Radio Elecon Nite Scout r/c car, some Sullivan control rod, ...
|
| NiMH for heli Rx? | 13 May 2004 23:08 GMT | 10 |
My local hobby store guy recommended against using NiMH batteries for the receiver in a heli (as opposed to the Tx, where he recommends). Any comments?
|
| NEXUS 46 DF Main Gear | 13 May 2004 16:25 GMT | 6 |
I am pretty new to R/C helis and finding it great fun learning to fly. I have a problem with my Main Gear on the NEXUS 46 DF, by that i mean the teeth on the main gear keep shearing off for no apparent reason. i have replaced it twice already but without resolving the problem. as ...
|
| As a newbie, i thought i would ask a simple question. | 13 May 2004 16:19 GMT | 27 |
Hiya all, Ah was itchin' fer a wee shot o' ma heli but it was a bit damp ootside. Wid it cause problems if ah was tae take ma heli oot in a day where the rain was as light as the spray in the wind fi a garden hose(?) Ah wid hae the handset
|