Model Forum / Radio Controlled / Helicopters / December 2004

Some one now a Sweden server for RC Flying?

I recently got a new set of main blades for my Raptor .70. The original
blades had a 5mm bolt and the Raptor grips are designed to accomodate a
5mm bolt.
The MS Composit blades I received have only a 4mm mounting hole.

Using a Sanwa RD-8000 Transmitter with the antenna fully opened
working with the Original Sanwa receiver 72 Mhz is about 100 meters
(on the ground) before I get some small vibrations in the Heli rudder
servo.

www.maxheadspeed.pwp.blueyonder.co.uk/MAX19-12-04.wmv
Just a wee shortie from today.  I just started doing chaos launches so I had
to show you guys :-))))
John

ik ben op zoek naar een nerdelandstalige nieuwsgroep
dank

merry christmas and a happy new year to all
darrell

Just an idle thought....
Can a heli engine (OS SX32H, I have one spare) be used in a fixed wing
aircraft without mods? I'm thinking probably not and mainly due to the
carb.....

I haven't seen a new post in this group for the last 24 hours! Is it me, BT
Openwoe News Servers, or is everyone just busy?

The tail action on my 50 Rappy seems lazy, there is no positive stop in
either direction, what do I increase to make the tail positive (CSM420,
8700G)
Regards

All you owners of RF G3, the much anticipated Helicopter Update has
been released and is now avialable to the public.
You can either request they send you the update (CD)... or you can
download it for free! Warning its 137MB so you'd better be using

I'm new to RC Helicopters and am proceeding slowly.
At present I am building a Thunder Tiger Raptor V2 30 model. I am at the
stage of fitting the servos. The problem I have is in setting the amount of
Pitch travel. It is nothing to do with the servo but a mechanical problem in

Taken a while to save.
Had some advice to go with century hawk with tail upgrade,
but really like the raptor workmanship.
Any one who has flown both comment please.

http://shop.rotor.com.sg/show-detail.asp?prodid={533C9C38-7B6D-4D4A-B9AE-3A359B57499E}
but only 72mhz is available

Jabo 2 electric heli,needs new tail motor as mine stopped working.Come
complete with 3 battery packs,training gear on heli plus another set brand
new,2 spare sets of blades,main and tail rotor.
Zhaen hua pcm 4 channel tanny,mode 2,left hand throttle.35mhz

Can anyone tell me if this is a good buy?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=5942692838&indexURL=0&photo
DisplayType=2#ebayphotohosting
thanks