Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / Radio Controlled / Helicopters / January 2005



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Try Soaring at 1:1 scale     Soaring Society National Convention31 Jan 2005 20:24 GMT2
Try flying at 1:1 scale
Ontario, CA -- By choice rather than bad weather or negative action
taken by the FAA or TSA, over one thousand glider pilots will be
grounded in Ontario on February 10 – 12, 2005. They will be attending
Bladerunner31 Jan 2005 01:48 GMT3
Hi, I just bought a cheap Bladerunner as my first RC Helicopter. I've heard
that you can improve maneoverabilty by cutting away a small plastic circle
in the tail. Has anyone done this with good results?
Thanks
CSM Revlock30 Jan 2005 17:22 GMT2
I am looking for some feedback before I buy can anyone help. Are they easy
to set up do they work with any tranny etc.
Cheers
Transmiter question from a NOOB30 Jan 2005 09:19 GMT4
Noob? I have honeybee elc heli, when I bought it I made a mistake an
got mode 1. I have 2 other controllers a Futaba T6HX and a JR Xp642. I
there a way to use 1 of them to control the elct heli. Oh the Futab
runs channel 60 /  72.990 MHZ, the 27 / JR 72.330 and the honeybe
Heli-Chair, a different way to fly your helicopter30 Jan 2005 03:20 GMT11
I have created a new and unique way to fly your remote controlled
helicopter.  Similar to the Fly Seat created by Ed Henry a long time
ago, but much refined.  Take a peek at my website!
http://www.heli-chair.com
Cleaning up an OS 61 SX-H WC29 Jan 2005 03:47 GMT1
I've got an OS 61 SX-H WC that's been sat unused in a crash damaged Raptor
for about a year and a half.  I want to clean it up and get it flying again.
The engine's probably only got about 20 hours on it at the most.  Are there
an solvents I could use to clean it out of all the old ...
FS high spec Raptor3027 Jan 2005 20:03 GMT5
     Hi
     I am selling my Raptor 30 which is a highly modded V1. It has a full
V2 head (grips, bearings, feathering shaft etc) including a Quick UK
headblock. Other upgrades include NHP carbon under-frame stiffner, NHP CF
first of several stupid questions for a little electric job26 Jan 2005 22:50 GMT1
My little Honey bee 2 3D  arrived today from hobbyjapan2000 and despite the
fact they say everything is tested twice before it left the shop I don't
think its been test flown as the paddles point in different directions the
3d switch had fallen inside the TX wrong TX mode no ...
flap dampers25 Jan 2005 17:15 GMT1
guys
what should I lube these with ? is vasoline petro jelly ok?
thanks
Is the blade on RC heli dangerous?24 Jan 2005 22:44 GMT21
Just wondering something that flies 10000 rounds a minute,
it may become dangerous.
Aerofly Pro Deluxe23 Jan 2005 12:57 GMT2
Does anyone know how to get the game to work without the usb cord it
came with.  I have my FMS cord to usb I would like to use.  Any help
would be great.
TIA
Little CCPM helicoters worth the money ?22 Jan 2005 21:08 GMT9
as Header the little ESKY CCPM helicopters seem to be Ideal for a small
field/hall  any body own one as yet and are they worth buying
Kevin
Real Flight G322 Jan 2005 20:50 GMT4
Whoopee!
I finally received the heli upgrade disk for my new G3 flight sim today!
This is a great simulator.
Anyone else using it?
I crashed my shuttle plus :(  any ideas how much it will cost to get fixed?22 Jan 2005 04:34 GMT2
I was showing off as my kids were watching me (NEVER AGAIN)
Anyways it was up then it banged down :( the boom is a gonna but my
main concern is that on the main blades. Its the butterfly looking
thing  plastic and is attached to the smaller ballancing blade,
Raptor or Sceadu  50`s20 Jan 2005 17:55 GMT6
Howdy all ,
I`m a newbie to the nitro choppers ,  been flying fixed pitched electric
ones for a while , now i want to take the step to collective petrol
choppers......
Pages: 1 2 3 4 December, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.