Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / Radio Controlled / Helicopters / August 2005



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Books on heli's06 Aug 2005 15:24 GMT8
Simply. What is the difinitive book on Radio, model heli's ? From building to hovering, & gyro's, to forward flight & circuits, to aerobatics, explaining everything, throttle cut, throttle hold, heli up, auto's, everything, the whole nine yards, & why. ? Cheers. Ray
New Site Up!06 Aug 2005 11:29 GMT1
for miniature Lathes and millings Visit our new online store at
http://clisby.macphreak.com
FREQUENCY03 Aug 2005 18:23 GMT3
Is there a device that can tell you if there is a signal on a given
frequency?
My heli just went nuts over at the park and did a lovely backflip, only
damage was a broken seesaw arm which I have a spare anyway.With my
Tail rudder assembly03 Aug 2005 14:38 GMT2
When hooking up the tail rudder to the servo, and the (tail mounted) servo
is in its neutral position, how do you install the rudder blade? What's the
pitch like?
I'm keeping it at zero degree. Is this okay?
T-Rex supplier from Taiwan via web03 Aug 2005 06:01 GMT2
I'm looking for some parts from the T-Rex (Align) that aren't delivered by
European web shops.
I would like to know about some Taiwanese web shop delivering parts abroad.
T&BR
Trimming problem03 Aug 2005 02:28 GMT5
I hovered the heli low and trimmed it well.
When I brought it up higher, it started to run away and I had to re-trim it
for that higher altitude.
Anyone having same problem?
E-flite Blade CP03 Aug 2005 01:26 GMT4
does anyone have a Blade?  Is it any good?
I have a Hummingbird V3 right now (FP setup). it looks like it's been to
hell and back.
Someone told me that the CP helis are much easier to hover because the rotor
throttle curves mixing etc02 Aug 2005 14:24 GMT2
Could anyone point me in the right direction I not an experienced heli pilot
but I can now hover and fly around bringing the heli back to me etc. I'm
using an old system and heli. I went to the expo show at Birmingham and went
silly and bought a new raptor v2 50 with a new JR6210 ...
E-Flite Blade CP batteries and aerobatics?02 Aug 2005 04:28 GMT2
I bought an E-Flite Blade CP a few weeks ago and really like it.  I was
suprised and how well it flew (after the sticky collective problem was
fixed) and how long the flights were on the stock batteries.  I'm wanting to
buy more batteries and am thinking of either 2 more stock Ni-mH ...
1st Flight and 1st crash.  Bye Bye Blades.01 Aug 2005 13:48 GMT19
Well I finally finished my Raptor .30v2 and started practicing hovering
at a local park.  I was doing OK and then well I had a mishap and my
wife caught it just as it was about to hit ground.  Here's a link if
you wish to see it
Any T-Rex pilots here??01 Aug 2005 08:08 GMT1
I have the new CDE CCPM T-Rex but I cannot fit the canopy as it fouls the
servo arms any one else had this problem?
Signature

Reply Address does work ??

I Need A Helicopter MENTOR01 Aug 2005 01:01 GMT2
I am a retired photographer and I live in Romoland, California.  It seems
that I also live in Sun City, California.  Anyway, there must be someone in
my area that can tutor me in learning to fly helicopters.
Please contact me, if you live in my area, and if you feel that you can
Pages: 1 2 3 July, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.