Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / Radio Controlled / Helicopters / October 2005



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
where to buy a Futaba to PC lead USB UK10 Oct 2005 23:26 GMT7
can anyone recommend a PC to Futaba training lead preferably a USB so I can
play with FMS on my laptop running windows XP Pro which has no serial ports
unless I carry the docking station
Engine running cutting out problem10 Oct 2005 22:34 GMT9
Essay only read if your not going to bollock me for grammar or spelling or
boring the tits of you :-)
I have two helix's both with engine problems one blew a hole in the piston
and has gone back to OS for repair. The other just keeps stopping without
Raptor 50 v2  tail disintegrated on spool-up10 Oct 2005 13:36 GMT1
Oh, dear!
I had done my preflight checks, started up and was just about to start
only the second flight of the season. The heli was about to lift-off
(going up through maybe 75% of hover power) when there was a bang and the
Flight simulator ???08 Oct 2005 06:41 GMT8
Hi to all ...
What is the best PC based simulator for RC helicopter flight training ??
Thanks in advance.
Kreso.
San Diego08 Oct 2005 05:53 GMT5
Getting out of hobby. VERY good deal on a Raptor 30, radio,
simulator, and many more parts. $700
(619) 293 0408    San Diego City. Priced to sell immediately. I
just want to get it out of the house.
Anyone around Smithtown, NY or Herndon, VA?07 Oct 2005 09:04 GMT2
Anyone flying around near me? I could use some pointers :-)
new USA outrunner manufacturer05 Oct 2005 22:55 GMT2
Goedendag,
A new USA based outrunner manufacturer (oh, and inrunners too ;-)
http://www.flyhurricane.com/
A list of outrunner manufacturers (worldwide, kits too), more than 60!:
Argh.. Blades won't track properly..05 Oct 2005 16:21 GMT5
Swapped out the asymmetrical blades on the Blade CP for the
symmetrical units and ran into a tracking issue.  Pulled the pitch
link for the low blade and tweaked it half a turn.  The low blade
became the high blade..  "untweaked" the pitch link and swapped blades
Stopping a helicopter05 Oct 2005 00:33 GMT24
I've built an old RC helicopter and after a few problems, I can now start
the engine, but if I close the throttle on the radio control it idles with
the blades are still spinning at a fairly quick rate. In the engine booklet
it says you are meant to hold the fuel line to stop the ...
Gummed up tail pitch control slider thingy04 Oct 2005 12:29 GMT3
Doing some early season maintenance today (Raptor 50 V2 SE) and checked
the tail servo control force (ie: disconnected the servo ball joint and slid the rod
with my fingers.)
Urgh, hard!
See a BIG fixed wing FLYING like a HELI!!!04 Oct 2005 12:23 GMT14
Although I fly helis Concept 60 SR and 30, I can't help but be AMAZED by
this clip!!!! FRICKEN UNBELIEVABLE.  The guy's MAIN site is
http://www.ivankristensen.com/ and the vid is here:
http://www.mission-thin-possible.com/coolvideo.html
Steering system for helicopter04 Oct 2005 10:20 GMT1
I think this one will stay on the drawing board.
-----------------------
Steering system for helicopter
http://www.iol.co.za/html/newideas/page2.php?loadpage=newidea.php&id=2056
Brand new and seeking advice03 Oct 2005 03:39 GMT9
A friend bought an electric micro Heli about a week ago, a hummingbird v.3
to be exact, and I had to have one as well. I decided to go a tiny bit more
expensive and got a Blade CP by e-flite (I thought it would be better to
start out with a CP so that I wouldnt have to buy one ...
Realflight G302 Oct 2005 16:27 GMT2
Can anyone tell me if the transmitter supplied with G3 can have it's
throttle moved to the other stick by the user or is it not possible.
Phil.
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.