| Thread | Last Post | Replies |
|
| Req: Real Flight G2 + all addons | 31 Mar 2006 16:13 GMT | 1 |
My 300gig HD died and I lost all my iso's for Real flight with the exception of the Real Flight v1 disk I have in the box could someone please upload G2 and the addons --------------= Posted using GrabIt =----------------
|
| Blade CX Balance problem | 29 Mar 2006 17:28 GMT | 4 |
Been flying for few months and occasionally need to replace a rotor blade <G>. With the yellow training balls, things don't get to far out of hand yet. After last crash and new blade, a vibration occurs upon liftoff at about 12"
|
| Forum | 29 Mar 2006 01:09 GMT | 4 |
I personally do not care for the newsgroups format so started my own Brand new Forum online. I set up a classified section and multiple categories. You must sign up and log in but it is ALL FREE. Later I will be adding a Gallery section for you to show off your rides.
|
| Raptor 30 tail rotor | 28 Mar 2006 11:47 GMT | 3 |
I have noticed the tail rotor on my heli stops and starts briefly as I spool up the main rotor before take off. once the main rotor is up to speed all is well and it flies ok. the last time I flew it the "snatching" of the tail rotor became more violent so I packed it in for the day ...
|
| So I want to get a helicopter.... | 28 Mar 2006 06:45 GMT | 20 |
So, yep, been reading the articles (dating back to 2003), read a mag ;-) but still have one burning question. As everybody says, the heli i want is the one which does the stuff I want to do with it. I want to learn to fly em. Pure and simple. Dont want to do 3d just
|
| BLADE CX - Larger Capacity Battery? | 26 Mar 2006 21:51 GMT | 6 |
Just got my Blade CX last week and already have become pretty good at hovering and turns. I have two (2) of the LiPo batteries, but have noticed that they seem to be wearing quickly -- getting about 6 minutes of real power out of each, then only get enough throttle to hover 1-2
|
| Idle ups | 24 Mar 2006 02:44 GMT | 4 |
Hello again folks, I am getting to the stage where I want to move on from hovering manoeuvres to forward flight and want to set up idle up 1. When should I switch flight modes? Do you all switch when the helicopter is
|
| Co-pilots | 20 Mar 2006 07:11 GMT | 2 |
Does anyone have any experience with flight stabilization devices such as the CPD4 or FS8 Co-pilots from FMA Direct? If so, how well did they perform for you? Thanks
|
| Some photos of my T-Rex | 19 Mar 2006 23:26 GMT | 1 |
It's getting there. Might move the ESC. Ps, the antenna will be changed for a Base Load I have before flight. G-Man http://www.gwfweb.com/rcflyer/pages/trex.htm
|
| Neighbours complaning about heli noise? | 18 Mar 2006 00:12 GMT | 21 |
Here's the cure! http://www.newscientist.com/blog/technology/2006/03/shotgun-wielding-helicopter.html I wonder what the recoil would do?
|
| Using a century elite 6 on a raptor 30 | 18 Mar 2006 00:09 GMT | 5 |
Hi, Im just getting in to the hobby, purchased a hummingbird V3, and crashed it many times ;-) Reading some posts from 3 years ago, somebody suggested getting a
|
| {bleep}ing Blade.... | 17 Mar 2006 19:48 GMT | 1 |
Blade CP.. New blades due to fumble fingers (Well thumbs) and I got it tracked and balanced. 3 flights on the new blades and it's out of track. Retracked 'em and they came out of track in the middle of the 2nd flight after retracking.
|
| what is FMS | 17 Mar 2006 11:00 GMT | 3 |
can anyone tell me the best & or cheapest to go R/C fying on my computer, i will be starting from sratch, although i have just brought r/c helicopter indoor flight simulation made by brightstar. i welcome any comments
|
| Century HumingBird | 15 Mar 2006 13:54 GMT | 4 |
I've just picked up a Century Helicopter HummingBird electric heli and wondered if anyone else had one of these machines and would like some feedback! Appreciated!
|
| Heli mag | 14 Mar 2006 23:30 GMT | 7 |
So... i have spent all morning running around Southampton, trying to find a heli related mag. Aeroplane, boat, car yep, heli... hahaha... WHSmiths said "a mag about heli's! well we dont do em.." she wasnt
|