| Thread | Last Post | Replies |
|
| UK: where to buy Green Zeal Tape for Gyros ? | 28 Feb 2008 19:30 GMT | 2 |
In the U.K. Where can I buy some Zeal tape, the green gel stuff with sticky on both sides used to fix/dampen gyros ? I want enough to last me a while.
|
| FA Trex electronics complete | 28 Feb 2008 17:02 GMT | 1 |
Pulled from low flight time trex. This setup worked very well with an align motor. Motor wasn't listed in auction. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200203688348&ssPageName=ADME: L:LCA:US:1123
|
| Any one of any experience with AirHogs Micro Reflex helicopter | 28 Feb 2008 01:14 GMT | 18 |
Over Christmas I've started looking at micro-helicopters. I've seen the reviews of the mosquito from and picco-z from Radio Shack, but my only concern on both of these is that the forward movement is really only gained via weighting the nose.
|
| 2 RC Helicopter Hirobo Shuttles Gas 30 size - $500 | 26 Feb 2008 16:00 GMT | 2 |
Posted on Boston Craigslist 2/25/08 For sale/general 2 RC Helicopter Hirobo Shuttles Gas 30 size - $500 Sounds like a good deal!
|
| jr x2610 reset to factory settings help | 20 Feb 2008 08:04 GMT | 2 |
Hiya It appears that the throttle is on the right, although the stick is setup for mode 1 - throtle on the left. I dont know if its something i have changed by mistake, so the question is, how do i restore factory
|
| Update: Twitchy tail rotor | 15 Feb 2008 14:07 GMT | 3 |
One thing I was NOT going to do was buy another stock tail motor. Thirty bucks every few flights was not going to cut it. After looking at various options ranging from dual tail motors to brushless I found a mod kit to convert it to belt drive so I ordered it. Cost about a
|
| Twitchy tail rotor | 07 Feb 2008 03:26 GMT | 19 |
I have an Heli-Max AXE CP all electric helicopter. Recently the tail rotor has become twitchy. It changes it's RPM often and instantly. Twitchy is the best way I can describe it.
|
| lower blade main gear replacement/ CX-2 | 06 Feb 2008 15:10 GMT | 3 |
Can anyone tell me is there a good way to remove the lower blade main gear (outer shaft) on a blade CX-2. Mine has about 5 teeth stripped out, I've orded a replacement, but am having trouble getting the old one off. Any help is great. Thanks Rich
|
| Manual for MFA Sport 500 | 05 Feb 2008 06:50 GMT | 6 |
I'm looking for the manual of MFA Sport 500. Some years ago someone in this newsgroup had one but unfortunenately this person has changed his email adress. Maybe someone could send me a manual. Thanx in advance! Jan
|
| Decent starter for a .70 motor? | 04 Feb 2008 10:31 GMT | 1 |
Can you recommend one? only used occasionally, not into serious flying, just a big boys toy really! Steve
|
| Shelf Clips | 03 Feb 2008 11:44 GMT | 6 |
This may seem a stupid question but I saw a shelf at someones house which had a heli on top and one under it. They were both 90's so a fair size. What intrigued me was the clips used on the shelf. They seemed like
|
| Alany Mini Mosquito Indoor RC Helicopter | 03 Feb 2008 11:16 GMT | 1 |
Hi Group, there are several models of mosquito rc helicopters on bargainmargin's website. Below is description for the "Alany Mini Mosquito Indoor RC Helicopter"
|
| helicopter model recommendation | 02 Feb 2008 06:27 GMT | 25 |
I'm looking for a helicopter capable of flying a pre-programmed path for 1hr+ with a 5lb+ payload. Can anybody recommend a model that fits that description? (preferably with a product link) Bonus points if it can return to a charging/fueling station and
|
| nightranger 3d xl | 01 Feb 2008 04:43 GMT | 2 |
My 3d xl has an issue and I'm not sure what is wrong with it. The tail will only turn left. I can hold the control stick all the way to the right and I can make
|