Model Forum / Radio Controlled / Helicopters / June 2008

Can anyone suggest a source in the UK to get an airwolf shell for a raptor
30 if one exists ?
Thanks,

If I understand correctly, the GvOf function is supposed to disengage
the governor when full throttle is applied. This makes sure you get
the engine's full power, even if it means overspeeding the rotor.
When I enable this function, the SwCd function still indicates "ON"

Can anyone help with a diagram for a Futaba S9405 Servo ?,
I'm trying to get some part numbers to replace some broken parts,
Thanks,

any idea what head speed for normal hovering and circuits I should be
aiming at ? I have just brought my first tacho

Anyone know of a source for a download of the manual for a JR XF622
transmitter?
--
Tom Spence

I just looked at Futaba's web site here in the States and noted that they've
updated their information on the effected 2.4 systems, namely the 6EX and 7C
radios as well as the TM-7 module.  They show potentially effected serial
numbers as well as those that should be clean, and ...

I have recently purchased my first helio (Raptor 50 Titan) and am getting
ready to assemble. Also purchased Aerofly sim and the "Basics of RC
Helicopters" book.
I have read thru most of the book but cannot find any info on what the

any one know how to set up autos in relex flight sim . useing th
throttle hold i go into full throttle negative pitch, crash mode. wha
settings should i use... any one know thanks
--

Just found this newsgroup and read some older posts. Thought of posting
my experience as a newbie!
Bought an e-Sky Comanche a few months ago. Flew a bit around and had to
buy quite some spare parts. :) But it's a funny small heli to start with