| Thread | Last Post | Replies |
|
| Fuel Leakage | 16 Feb 2004 23:26 GMT | 6 |
Hi People, I notice on my Tamiya XBG, that when I open the throttle a little spray of fuel comes out of the top of the fuel tank. It _looks_ like it is coming out around the primer button.
|
| batteries in the uk | 16 Feb 2004 12:11 GMT | 2 |
Where is the cheapest place in the uk to buy Buggy batteries. 7.2v 3000mah Oh yes also fast chargers. Possibly in bulk. Cheers
|
| highest winds | 16 Feb 2004 00:52 GMT | 1 |
what is the highest winds you ever have seen using the formula 19x4 = 76 this is the highest i can find from LRP as orion. have you ever seen a 19quint or 20x4 ??? Thx
|
| cooling fins | 15 Feb 2004 18:24 GMT | 1 |
I have got a patriot reverse speed controller which I have fitted to my cat3000. But if I fit the cooling fins on the speed controller as the instructions say my body shell does not fit properly.
|
| Nitro Engine Smoke | 15 Feb 2004 10:23 GMT | 3 |
My Nitro Car is about a week old now. I ran it in by running about 5.5 tanks through it at idol speed. I also drove it very conservatively for about 5 more tanks. I drove it a couple more times and everything seemed fine. When I drove it
|
| Fast attack vehicle | 14 Feb 2004 19:59 GMT | 1 |
Just been to our local tip to drop off some rubbish and poking out of a skip almost calling to me was a 2 wd Tamiya Fast attack vehicle! grabbed it quick jumped in the car and left pretty quickly. http://www.tamiyaclub.com/showroom_model.asp?cid=6333&id=15 for an idea of
|
| SPUR AND PINION GEAR | 14 Feb 2004 14:33 GMT | 3 |
WHAT EFFECT DOES CHANGING FROM A STOCK MOTOR TO A LOW TURN (HOT MOTOR) HAVE ON SPUR AND PINION GEAR? I HAVE AN 88T 48P SPUR GEAR AND A 20T 48P PINION GEAR. DO I MAKE THE 20T HIGHER OR LOWER? DO I MAKE THE 88T LOWER?
|
| Fataba 2PL short range | 14 Feb 2004 04:26 GMT | 1 |
Hi all. Im not new to R/c. I have been flying planes for years. I just got me a HPI MT Racer, so I could run around with a friend. But im having a bad range problem. I have a Full charge on the Rx and Tx batts and it will lose control 15 feet away and other times I can take it real ...
|
| LF | 14 Feb 2004 03:16 GMT | 2 |
a stadium truck roller or more cheap real cheap
|
| Original RC10 Tires/Wheels | 13 Feb 2004 17:14 GMT | 2 |
I've been scouring the internet for some time and the only place I'm able to find tires/wheels for the Original (gold tub) RC10 is on Ebay. This would be fine, but there is only one set right now! Does anybody have any suggestions on a good replacement setup?? I'm interested in ...
|
| NiMH Batteris - Current Versus Voltage | 13 Feb 2004 10:52 GMT | 7 |
Hi People, OK I'm displaying my ignorance here (all my other cars are nitros), but I need help. I have a 1/18 scale on road electric micro car. It runs on 4 x AA batteries
|
| wuts faster | 13 Feb 2004 00:46 GMT | 4 |
is it the smaller the turn the fast it go's i meen is 6t faster then a 19 t or is a 19t faster then 6t thanks
|
| MRC 969 Pro - AC amperes? | 12 Feb 2004 16:59 GMT | 8 |
Anybody know how many amps the MRC 969 Pro, will charge off an AC source? It says it will do 4.5 off DC, but I usually charge indoors. Matt
|
| Newbie: motor controllers?? | 12 Feb 2004 10:49 GMT | 1 |
--I'm building a 12-lb bot for the upcoming RobOlympics. Drive consists of two 12-v variable speed drill motors. What I need is a motor controller that will hadle both motors and permit forward/reverse and variable speed. Can someone suggest brand and model number? Thanx,
|
| New to RC cars | 11 Feb 2004 03:29 GMT | 4 |
My daughter have expressed interest in starting out in this hobby, she already has some cheaper (nikko) rc cars and trucks. I would like to start her into nitro cars, she really wants a monster truck, but anyway, my question is this...
|