Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / Radio Controlled / Land Models / April 2004



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Another Hitec Question.12 Apr 2004 12:51 GMT3
OK, i have bought myself a new Futaba 3PK radio set, this included the HRS
receiver for which only digital servos can be used. Instead of buying
expensive hi power servos i opted for the Hitec HS-5645MG for the
throttle/hydraulic brakes.
Motor Suggestions11 Apr 2004 21:49 GMT8
I'm looking to upgrade my Stampede & Blackfoot to a 17 turn motor. My
questions are:
Will I have to upgrade my ESC?
What type of 17 turn motor should I get? I am looking for some kick a.s 
TC3 gearing11 Apr 2004 19:01 GMT2
we're getting some TC3's ready for some large expansive parking lot
races.
For a 19T Chameleon Pro motor what would you gear the car at?
Hasbro flash racer problem?11 Apr 2004 01:26 GMT2
I have just bought a fire blazer flash racer from Hasbro(wowwee), this is
the car that is covered in flashing lights that display in heaps of
different patterns. Anyhow the problem is that the car will not drive
straight, it drifts off to the left all the time, is this typical?
RC Cars on South Park, Tonight's Episode...11 Apr 2004 00:47 GMT3
What else can I say?
Signature

Dirk
(aka "!bungle")

Re: Kyosho Front Wheel Drive Buggy Kit10 Apr 2004 19:47 GMT1
I remember seeing one when I purchased my t-optima and wanted to know i
anyone had any info on this ki - I know my details are sparce but
really don't know anymore _ I do remember tower pushing these hard
please any info would be appreciate
cultch installation10 Apr 2004 12:02 GMT1
hi all, need help. just put a mach .26 in my t-maxx and started to break
it in when the flywheel came loose, i used a new collet thingy, how do i
make shure the flywheel is tight?
thanks all for your help,
Adjustable Shock Collars - RC10 Series10 Apr 2004 06:09 GMT2
I am looking for four adjustable shock collars from the old-en days to place
on my B4.  The collars that I speak of are the kind that were on the old
RC10 cars and trucks.  I have an old RC10T (1993 Team Edition) and the
collars on that are the type where you use an allen wrench to ...
HELP Hyper 7 pro Graphite vibration interferance HELP09 Apr 2004 23:17 GMT4
we just recently Purchased a hyper 7 pro and put all our radio gear fro
our Hyper 7 PBS in it all the sudden it goes crazy and wants to ru
off. We have put in several different receivers and at the same RPM i
takes off. Now i have heard of this problen with a electric tc3 PRO
Could you help?08 Apr 2004 21:25 GMT3
I am new to RC cars, but have been flying RC helicopters and planes for a
few years now..
Anyway, I have bought a Traxxas 4 wheel drive car from ebay.  Only problem
is, I dont know what model it is and I need to order a drive belt - can you
Any free RC catalogs?06 Apr 2004 19:27 GMT1
Anybody know of any free RC car catalogs I can get?
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
*** Usenet.com - The #1 Usenet Newsgroup Service on The Planet! ***
COM 25MPH without a motor!06 Apr 2004 17:52 GMT2
Many of my son's dealers for the RCWindjammer are nitro people. Many of his
customers enjoy both motorized cars and remote control surface sailing and
this is why I am taking the liberty of inviting you to see a short, 2.5
minute .wmf video of some really fast and maneuverable ...
new body onmy tmaxx question05 Apr 2004 01:14 GMT2
I am in the finishing process of trimming my new H2 body for my tmaxx. The
way it sits now there is no ventilation for the motor. Should I cut any vent
holes in the roof?  What about the windshield does that need a vent hole?
any help would be appreciated.
Any coupon codes for Tower Hobby?04 Apr 2004 20:17 GMT2
I was getting to order some more Stampede mods, and wondered if there
are any discount codes.
new site rc01 Apr 2004 19:28 GMT1
http://www.amcc-nh.com
Pages: 1 2 3 4 5 March, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.