| Thread | Last Post | Replies |
|
| damaged_cell | 31 Aug 2005 16:39 GMT | 3 |
One of the cells in my battery pack has cracked open and it gets hotter then the other cells when riding. Is this a well known scenario? And what is the best solution to this problem? Here is a picture of the damaged cell:
|
| I jinxed my E-Maxx :( and now its 2 wheel drive! | 30 Aug 2005 05:18 GMT | 4 |
Sunday morning, I'm waiting for my batteries to charge so I can take the E-maxx out for a bash, so I'm just fiddling with the thing, looking over it for any loose screws etc. I flip the thing over and notice the driveshafts, particularly the amount of wear in the unis, damn I never ...
|
| Duratrax Nitro Evaders or Tower Hobbies ST-15 ? | 30 Aug 2005 04:25 GMT | 3 |
Which is better build and good for backyard bashing ? I am talking both vehicles in nitro . I was to get my son and I into nitro with a prebuilt and use our electronics from our electric truck. Any opinions on these two models ?
|
| Anyone driving a Duratrax Nitro Warhead? | 30 Aug 2005 01:31 GMT | 2 |
If so, what are your thoughts? Condsidering picking one up. Doc
|
| Largest R/C Message Board ? | 30 Aug 2005 00:08 GMT | 7 |
I would like to know what would be the largest R/C messageboard. I would like to get some reviews and opinions before I purchase a nitro truck. Thanks, Iowa883
|
| Decal program | 28 Aug 2005 16:32 GMT | 14 |
Can anyone tell me of a program that will help me design decals for models? Thanks
|
| New To RC Nitro | 27 Aug 2005 19:09 GMT | 1 |
Hey I live in Aust. I just got into RC Nitro Cars, I got my self a 1:6 Model Sedan, got a motor with the size code of 25, It is 4WD and a 2 speed, it is pretty fast, but I always thought that it would be a little faster, I have looked everywhere
|
| Need advice | 26 Aug 2005 00:24 GMT | 2 |
Just getting started and i dont have alot of money to spend. I want a eletric buggie that can have hop ups. I want to race it in races and want it to be rtr or kit. I just dont want to spend money buying motors and extra parts. If anybody can help thanks.
|
| electric v's nitro/petrol | 25 Aug 2005 17:20 GMT | 8 |
I am looking to get my first rc car and would like advise on what is best to buy , i have been looking at nitro cars but these seem that they might take a lot of tuning / maintenance. I have around £150 - £200 to spend any recomendationas would be most
|
| need information about techniplus acoms AP227 MK III | 25 Aug 2005 16:12 GMT | 3 |
I need informations about the sender techniplus acoms AP227 MK III. Is it 27 Mhz? is it AM? thanks John
|
| Dear RC Model Answer Thingy | 25 Aug 2005 03:59 GMT | 1 |
Where can you get parts for old Tamyia Modles? ie. the Tamyia Fox....I had one local hobby store search online for me but they couldn't find any....My model still works but I'm afraid if I start to use it again I'll break something.
|
| 1/8 buggy | 25 Aug 2005 02:09 GMT | 2 |
just raced my ebay-ed ttr s-3 and came in fifth, considerig this was the first time i have ever raced '8th scale and i've only had about 20 min practice with it before race day, I think i did quite well and-- whad an adventure, not to mention hat there where only 5 entrants, anyways ...
|
| Want to get started! | 24 Aug 2005 23:27 GMT | 1 |
I have just recently gained some interest in r/c cars, and was looking for some information on the best way to get started. I am looking for suggestions for a good starter car (new/used) that I do not have to dump a ton of money into in case it becomes a dust collecting
|
| Savage 3-gallon woes............ | 24 Aug 2005 21:46 GMT | 2 |
An update for those interested: All was going great with the ol' Savage 25 until a few tanks after the three gallon mark. It started when the right-rear carrier bearing blew it's guts out at 40mph, completely lunching the rear differential in the process.
|
| An RC site anyone can edit :) | 23 Aug 2005 13:44 GMT | 1 |
Hi, not too long ago I started an RC Wiki, a site anyone can edit. If anyone wants to check it out, or maybe help out with the project, come to http://radiocontrol.wikicities.com.
|