Model Forum / General / Models / December 2004

Does anybody here know what moulds are used on the kit i've posted
thie following link for?
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=5941408475
Does anyone know if this lit has raised or engraved panel lines?

Please consider looking at this link
http://cgi6.ebay.co.uk/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=ldkershaw
It's a friend who doesn't really know newsgroups and is having a major
clear out.  Some are vintage some not, but please take a look.

Has anyone got the beam and centres that mount on the back of a lathe to
hold the 'master' for a Hepworth / Colchester hydraulic copy attachment?
Basically it's a flat bar about 30 - 40" long with dovetails on the long
edges to mount centres.

I need some advice about the pressure limits of my Dad's homemade
pressure chamber, and the possible severity of a failure of it.
Dad's hobby is model aircraft, and earlier this year he decided to try
casting some of his own details in some kind of two-part resin (I

good kit? worth $14 bucks?

i got candy in my shoes, you guys?

I used to build models when i was in my teens, but never really
considered it serious modeling. However, I now have a son who is 3,
and want to decorate his room with model aircraft as he seems to like
planes as well as trains!

Does anyone know of a source of alloys like monel, inconel, hastalloy,
titanum (ok, not an alloy), lithium alloys, and so on, in small quantities?
ie a few pounds worth (or even a few tens of pounds worth) of each
shape/size/alloy?

Gents,
I have just returned from Thunder City after a flight in Hunter T8 ZU-ATH
and Buccaneer ZU-NIP. Using the Aeroclub conversion would the 1/48th Academy
F6 or FGA9 be the best basis for this project.

I was told the boys at IPMS are going to ban ANY kit made in
China/Russia/Pakastan/Iraq/North Korea from any and all contests as of
January 1st!
I also hear that NO figures depicting ANY person in a headscarf will be

DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA
DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA
DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA DIANA
DIANA DIANA ...

I wonder how long before Googling is no longer free.?

WmB
To reply, get the HECK out of there

is the wingfold in the correct place?
obviously the hardware is wrong, but if it is the right
joint...el scratcho, i hope.

Just in case no one is aware, beginning on channel 4 tomorrow night
(Monday), at 9pm is a four part series of a crew being trained as in WW2 for
flying the Lancaster.
The crews made up of 5 men and 1 woman and should be good to watch.

I need some advice on stepper motors that have the power to control the
equivalent of a lathe top slide screw.
In an ideal world, I would like to be able to control the motor to any
speed, be able to set a zero position and a maximum position stop, so a