Model Forum / General / Models / May 2005

What do you do with it after you use it to strip paint?  And what's the best
way to get it off the model after I'm done stripping the paint?  Thanks!
                                           Sara

I have two Modela kits, a Blanik and a Lunak. They are both excellent
kits. I have looked on every site I know, plus google searches for more
information about Modela or other kits they make, whether gliders or
not, but I haven't found anything.

I need to mill slots in some 2mm thick carbon fibre tube (made from
woven carbon cloth) - the slots need to be 2.5mm wide - so I guess I'm
looking for a 2.5mm Tungsten carbide mill bit?
Any ideas where I could get one?

THE MOST IMPORTANT QUESTION OF YOUR LIFE
This is the most important question of your life.
The question is: Are you saved?
It is not a question of how good you are, nor if you

I need a couple of lengths of 5/8 UNC  around 5 inches long to bolt down my
lathe.  The studs screw into the cast iron feet of the lathe and then
throught the bench.  Come to think of it some nuts wpuld be good to!
Anyone know of a good mail order or local source ...

___________________________________________________________________________
From: noone@some.domain (e)
Newsgroups: alt.binaries.news-server-comparison
Subject: Re: What is it with "free" text servers and *.bin groups???

I may be able to say something soon since I won one off E-bay yesterday.
It's just a conversion body for the 'AMT' '57 Ford but it should say
something about the rest of the offerings.
Bill Banaszak, MFE

From: flockofbadhaircut100league@verizon.net (e)
Newsgroups: alt.binaries.news-server-comparison,alt.binaries.sounds.mp3.d
Subject: Re: mheh
Date: Sun, 23 Feb 2003 20:45:47 GMT

Received via my web site
Robert Ronning writes....
"I just bought this Crossley at the Portland swap meet in Ind. U.S.A
and had it a farm show today. It ran great all day. My engine is type

1/144 HH-53C 04032 helicopter  Revell
Not for me but a guy in FLorida, 3 or 4.
anyone? its OOP

Ok i need a bit of help here, if anyone has done this.
My German chick goes home in a few weeks, exams etc are the last at home, im
due to go to Dresden in Sept, but i checked with Air Berlin and they dont
allow animals from the UK, she loves my dog so was going to surprise

Anyone know a source of 3/32" dia round head brass rivets 1/2"or longer??
These are listed by Chronos, but no longer available.
Query for a friend without internet access.
TIA,

In the vast range of modeling websites of today, there is one missing if
you ask me: a website that would list the (brief) histories of
manufacturers. The histories of the big companies (Revell, Monogram,
Aurora, just to name a few) are pretty well known, but what about

Check out the latest and greatest on Cybermodeler Online
www.cybermodeler.com

if you built a model you still have the frames left after building the
model. Or even spare parts.
Do you throw this away or do you use the leftovers from the frames for
something? or can you melt these leftovers and form something (like