Model Forum / General / Models / July 2005

I've just about decided to buy the Warco Economy Mill but am unsure of which
spindle would be best. I won't be doing any really heavy milling, no hogging
out of great lumps.
What does the panel think about the two different spindle tapers?

anyone got any comments on this kit. how does it compare to the
offering from italeri? the nose of the hasegawa kit looks a little
small, but the weapons in the kit and the decal sheet are both very
good.

Is this kit a Hasagawa kit? Seems like Hasagawa has a F model in the
wings and the way the kit is broken down would sure show that a two
seater can not be far off. Also we've seen quite a few Hasagawa kits in
Revell's boxes the last few years.

Well check ~this~ one out.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5986566017&category=1189&rd=1

 Ok, the next kits in my small list....
 Tamiya brand Tiger I, 1/35th scale, late production unit. The lower
body has axles attached, one rear wheel, back panel and one exhaust
pipe installed.  Upper body/deck is NOT attached but has front face

Hey guys. booked my coach there, leave London next Tue and get there Wed.
My chick has to work in the week, so i have Thur and Fri free. I will spend
a day in Berlin and one in Poland.  Any things of interest? Not botherd
about model shops etc as i dont have any cash at all but ...

OK, so my wife and I just went through the newly-opened U-505 exhibit
at the Museum of Science and Industry in Chicago.
They did an excellent job.  It's just freaky, though, to see the old
girl INSIDE a building.  Inside a building, UNDER GROUND.

I just picked up Replic No 166 and would love to have translations of the
Mirage IVA and Beechcraft C-45/JRB-2 articles. Is such a thing available?
Curt

i have a one ton flightline chevy van i bought from the
usaf. great diesel, makes a great camper. but no ac.
local louts wanted 1500-2500 bucks for ac. i decided to
cheap it. bought a 2500 watt voltage inverter and a 4 amp

Are there any vendor tables left at the IPMS Nationals this year?
Ken

Who is going to be selling kits at the nationals?
Let me know
Thanks
Patrick

Check out the latest reference to help with the growing variety of pre-WW2
naval aircraft kits on Cybermodeler Online www.cybermodeler.com

I'm considering buying a miling machine and am trying to decide between
two Warcos.  First up is the VMC which is a turret mill,  this has a
speed range of 160 to 2500 odd and a table travel of around 14" x 6".
The other contender is the GH Mill Drill which is a very similar ...

Any of you clever types know where I can find a design for a circuit
to convert the output of a ~1vpp Heidenhain scale to TTL? I gather
it's possible and not too complicated if you know how!
Either that or the source of a Heidendhain DRO that will siut ~1vpp

All,
The annual Austin Scale Modelers' Society annual show was held today,
and there was an unexpected vendor present: Williams Brothers!
It seems that a sale of the company's assets has been completed, and