Model Forum / General / Models / October 2005

Hi all, another question, like I said before i`m new to all this so
please bear with me. When I want to change the chuck in my Chester
super B do I undo the three allen screws behind the chuck ? Besr
regards Pete.

I've come across a couple of photos of F-102s in SEAC colours but it is
hard to make out serials, codes, etc. Does anyone have any info on the
units which flew these camo'd acft, which serials, etc please?
Also, did they have the Case X or XX wing, I guess I'll be ble to tell

Hullo All. I am looking for a 1/35 model of the above. I have never seen
one, has anybody out there seen one????

Are these modulators any good?
http://www.gijoesradioelectronics.com/scripts/prodView.asp?idproduct=517
_________________________________________
Usenet Zone Free Binaries Usenet Server

Some slang to help you on the channels:
ACE - Important CB’er
Apple - A CB addict
AF -Audio Frequency

I`d like a couple of pints from the fountain of knowledge please:
I`m having trouble engaging the carriage feed on my ML7,as in it won`t.Well
not very easily anyway.It does finally start to move if you hold the lever
down long enough its had the problem since I got it but recently ...

Has anyone a good set of 1/2"  (13TPI) UNC coventry die chasers for
either a 1/2", 3/4", or 1" diehead that they'd like to convert to beer
tokens?
Also after some 1/2" EN8 rounds in minimum 13" lengths

I just discovered this:
http://www.almansur.com/jollyrogers/jolly61.htm
I've never seen most of these schemes on models, but then I don't get
out much!  :D

My company are threatening to move me up from Autocad LT 2005 onto th
latest version of Solidworks 3D.
I have seen it but not had a chance to play with it yet, has anyon
here got experiences of making this transition  from 2D to 3D ?

On scrapheap challenge they had to build electric cars. One team were given
a large motor does anyone know a rough figure for the horsepower of the
motor?
Thanks

Kit Review: Dragon Models Limited 1/72 Scale Armor Pro Series Kit No.
7223; Sd.Kfz. 251 Ausf. C; 135 parts (127 in grey styrene, 5 etched
brass, 2 in tan DS plastic, 1 section of metal wire); retail price
$11.98

Been thinking of breaking out of the 1/48 ranks and relive some of those
bygone days when I first built the big 1/32 Revells. Been fighting the urge
but tonight I spotted the Revell Tomcat for $40 at Hobby Lobby. Is it worth
the $20 after the discount or should I hold out for ...

I've just been looking through Revell's instructions for their F/A-18E
and was not able to find any information about the location of this
aircrafts positon lights. Very strange.
I know each vertical tail has a red light on the outside and the right

OK guys, put on your collective thinking caps for this one.  I am
about to paint several A/C in aluminum plate and I'm at a quagmire as
to what type of metalizer to use.  By the way, this will be my first
trip into the metalizer world.

Hi all, delurking for a bit.....
I have a damaged bronze bushing I need to replace.
I assume it's either phosphor bronze or leaded bronze.  Is there an easy way a lightly equipped tyro can tell which of
the two materials it is.