Model Forum / General / Models / December 2006

Sorry if this ends up a double post--I was looking for the 1/32 builders
site, but can't find it anymore.  Anyone have any ideas?

Took home a HERAEUS hardening (type KR 260) furnace for 100 EUR.
Inside dimensions: 260 * 150 * 450 mm.
Type-plate says 20 Amps.
Only problem is, one of the heating elements is burnt.

Frakkin' morons didn't put the gear down. $7.9M of your tax dollars at
work....
http://www.zianet.com/tedmorris/dg/bombers4.html
Payback should come out of ~their~ wallets!

Our little Nokia CRT telly has suddenly lost one colour in a band at
the top of the screen, and another at the bottom. This was sudden and
it hasn't deteriorated since. My assumption is that the set is now a
bin job, but might it be a simple adjustment which has gone wrong? I

How do you remove the black from black iron without resorting to shot
blasting or an angle grinder? Is there a 'pickle' I can use? I an only
dealing with small pieces

Is there still a copy of Chris's web site about if so anyone know the
address
Thanks

Has anyone seen a model of a late model gran prix (gt4, gt, widetrack
doesnt matter) any model will work as long as its late like 2004+. any
help greatly appreciated

19th century US Army cavalry tactics.  I assume there was a printed
manual back then.  Might it be on the 'net somewhere?
Bill Banaszak, MFE Sr.

I'm going to be away from home for a month as from next Thursday, so I
intended to get all my projects finished before then. Unfortunately, the MPM
Meteor was such a fun build that I finished it way ahead of schedule. Now I
have nothing to build! I spent today replacing the pitot ...

Piper Hobby,  13892 Metrotech Drive, Chantilly, Virginia 20151
703-803-3103 is the place to go for plastic models.  They have the best
selection around.

Store is actually in Avondale or Goodyear, out on the west side of town.
Printed out and used my 40% off coupon- scored a Hasegawa 1/32 FW190A-8 for
$30. Place really doesn't have a great selection of kits. One gripe- they
don't have price scanners. My wife was trying to get some ...

I found some of the micro size slide release bar clamps on sale - pack of
two for about $7.  I've never noticed them in the store before, just the
full size carpenter's models.  These are comparable to what you order from
Micromark and other hobby catalogues.  About a 5" x 1" ...

IPMS to begin charging members an additional $30 a year in order to keep
afloat.
Head honcho declares " we are just going to have to bleed the model builder,
if they can afford a $130 kit, they can afford to pay more money to the

Is it just me, or has ebay changed its page width slightly in the last
few days. If I look at any specific item it is exactly the correct
width to fill the screen, but if I look at a search list or one of
their specific category lists, it is just slightly too wide - maybe

there are 12 ww1 vets alive. their average age is 108!